M17 Speedometer Gear for AUDI 75 80 B1 B2 100 C1 C2 Speedometer Repair Mechanical

M17 Speedometer Gear for AUDI 75 80 B1 B2 100 C1 C2 Speedometer Repair Mechanical

Excellent workmanship quality

Description:
In the odometers of mechanical speedometers, this gear often breaks radially with a fine hairline crack. It then no longer sits firmly on the shaft and moves to the side. Sometimes this crack is barely noticeable, so just test whether the gear can be twisted/moved on the shaft.

Mass:
Overall width uniform: 6mm
Tooth flank width uniform: 2mm
Diameter (tip-tip):
M10 = 12.3mm
M11 = 11.0mm
M12 = 11.3mm
M13 = 11.0mm
M14 = 11.2mm
M15 = 11.7mm
M16 = 12.1mm
M17 = 11.9mm
M18 = 11.9mm
M19 = 12.5mm
M21 = 12.5mm
M25 = 13.2mm
M29 = 13.3mm

A notice:
We also recommend replacing the roller wheel on the same shaft if you have dismantled and opened the speedometer anyway. Both gears are the typical weak points. If the wheel can turn on the shaft, it is already damaged.
There are 3 different thickness versions (1.3mm; 2.2mm; 3.0mm). Simply measure the tooth width of the gear and order the right one from the shop.
Keyword: “roller gear”

Important:
Please count the number of teeth before purchasing. Unfortunately, no information can be given about the number of teeth in all models.
We have all gear variants in our range.

Service:
We have over 100 gear variants in our range and can supply the right gears if required!

+ all alternative sizes always in stock
+ fast exchange service in the event of a size discrepancy

Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the pairs of gears.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.

If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grip the center of the speedometer needle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.

partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.

Reference numbers:
21831
88471067


Scope of delivery:
1 gear

Suitable for:
Audi 50
Audi 80 (B1 / B2)
Audi 100 (C1 / C2)
Audi 100 Coupe S
Audi Super 90 (F103)
Audi 72 / 60 / 75 (F103)
The gears are suitable for all mechanical VDO speedometers.

Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/