Article successfully added.
62.18€* 68.18€*
Prices incl. VAT plus shipping costs
Available immediately
This item will be shipped today if you order within 3 hours and 30 minutes!
- Order number: 2219
- Manufacturer: partworks
Instrument cluster gears for BMW E30 316i 318i 320i speedometer MOTOMETER E SET... more
Instrument cluster gears for BMW E30 316i 318i 320i speedometer MOTOMETER E SET
Description:
If the odometer/trip meter has failed on your vehicle, the gears shown are usually the cause. Most of the time one of the gears breaks and the drive stalls.
We advise commercial customers in particular to change these four gears directly. Often after replacing one damaged gear, the partner gear fails a short time later. Replacing all the gears ensures that the drive will function for a long time.
Variants:
The following variants are possible and available from us:
Var.A MotoMeter E1+MM2+MM3+MM4 with the following number of teeth: 12 | 44x16 | 40x22 | 35x22
Var.B MotoMeter E1+MM2+MM3b+MM4b with the following number of teeth: 12 | 44x16 | 40x28 | 28x22
Var.C MotoMeter E1+MM2c+MM3c+MM4c with the following number of teeth: 12 | 44x17 | 38x23 | 33x26
Var.D MotoMeter E1+MM2c+MM3d+MM4c with the following number of teeth: 12 | 44x17 | 38x28 | 33x26
Var.E MotoMeter E1+MM2d+MM3e+MM4e with the following number of teeth: 12 | 43x16 | 39x28 | 28x22
Var.F MotoMeter E1+MM2e+MM3e+MM4e with the following number of teeth: 12 | 43x17 | 39x28 | 28x22
Var.G MotoMeter E1+MM2e+MM3f+MM4e with the following number of teeth: 12 | 43x17 | 40x34 | 28x22
Var.H MotoMeter E1+MM2e+MM3f+MM4e with the following number of teeth: 12 | 44x16 | 40x34 | 23x22
You can get variant E here!
Important:
1. First determine whether you have installed a VDO or a MotoMeter drive. To do this, take the instrument cluster out of the dashboard and look at the nameplates at the back. The information on the front between the tachometer and the speedometer is NOT always correct!
2. The number of teeth on all gears varies depending on the model. It depends on many factors (wheel size, gearbox type, engine type, year of manufacture and much more). A secure assignment is not possible. We therefore ask you to determine the number of teeth on the gears and compare them with the variants described.
Service:
We have over 100 gear variants in our range and can supply the right gears if required!
+ all alternative sizes always in stock
+ fast exchange service in the event of a size discrepancy
For the repair, we will send you illustrated repair instructions (German/English) by email.
Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grab the speedometer needle in the middle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
6160444216
6160444316
1377302
1381851
1381871
1386499
110008357002
110008403021
110008403036
62121372229, 621.213.722.29, 621 213 722 29
62121376724, 621.213.767.24, 621 213 767 24
62121377343, 621.213.773.43, 621 213 773 43
62121381706, 621.213.817.06, 621 213 817 06
62121377344, 621.213.773.44, 621 213 773 44
62121377647, 621.213.776.47, 621 213 776 47
62121381482, 621.213.814.82, 621 213 814 82
Scope of delivery:
see illustration
Suitable for:
BMW 3 Series (E30)
also Alpina and M3
with MotoMeter speedometer! We also have offers in the shop for models with VDO speedometers.
Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/
Description:
If the odometer/trip meter has failed on your vehicle, the gears shown are usually the cause. Most of the time one of the gears breaks and the drive stalls.
We advise commercial customers in particular to change these four gears directly. Often after replacing one damaged gear, the partner gear fails a short time later. Replacing all the gears ensures that the drive will function for a long time.
Variants:
The following variants are possible and available from us:
Var.A MotoMeter E1+MM2+MM3+MM4 with the following number of teeth: 12 | 44x16 | 40x22 | 35x22
Var.B MotoMeter E1+MM2+MM3b+MM4b with the following number of teeth: 12 | 44x16 | 40x28 | 28x22
Var.C MotoMeter E1+MM2c+MM3c+MM4c with the following number of teeth: 12 | 44x17 | 38x23 | 33x26
Var.D MotoMeter E1+MM2c+MM3d+MM4c with the following number of teeth: 12 | 44x17 | 38x28 | 33x26
Var.E MotoMeter E1+MM2d+MM3e+MM4e with the following number of teeth: 12 | 43x16 | 39x28 | 28x22
Var.F MotoMeter E1+MM2e+MM3e+MM4e with the following number of teeth: 12 | 43x17 | 39x28 | 28x22
Var.G MotoMeter E1+MM2e+MM3f+MM4e with the following number of teeth: 12 | 43x17 | 40x34 | 28x22
Var.H MotoMeter E1+MM2e+MM3f+MM4e with the following number of teeth: 12 | 44x16 | 40x34 | 23x22
You can get variant E here!
Important:
1. First determine whether you have installed a VDO or a MotoMeter drive. To do this, take the instrument cluster out of the dashboard and look at the nameplates at the back. The information on the front between the tachometer and the speedometer is NOT always correct!
2. The number of teeth on all gears varies depending on the model. It depends on many factors (wheel size, gearbox type, engine type, year of manufacture and much more). A secure assignment is not possible. We therefore ask you to determine the number of teeth on the gears and compare them with the variants described.
Service:
We have over 100 gear variants in our range and can supply the right gears if required!
+ all alternative sizes always in stock
+ fast exchange service in the event of a size discrepancy
For the repair, we will send you illustrated repair instructions (German/English) by email.
Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grab the speedometer needle in the middle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
6160444216
6160444316
1377302
1381851
1381871
1386499
110008357002
110008403021
110008403036
62121372229, 621.213.722.29, 621 213 722 29
62121376724, 621.213.767.24, 621 213 767 24
62121377343, 621.213.773.43, 621 213 773 43
62121381706, 621.213.817.06, 621 213 817 06
62121377344, 621.213.773.44, 621 213 773 44
62121377647, 621.213.776.47, 621 213 776 47
62121381482, 621.213.814.82, 621 213 814 82
Scope of delivery:
see illustration
Suitable for:
BMW 3 Series (E30)
also Alpina and M3
with MotoMeter speedometer! We also have offers in the shop for models with VDO speedometers.
Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/
Related links to "Instrument cluster gears for BMW E30 316i 318i 320i speedometer MOTOMETER E SET"
Keine passenden Fahrzeuge gefunden
Read, write and discuss reviews... more
Customer evaluation for "Instrument cluster gears for BMW E30 316i 318i 320i speedometer MOTOMETER E SET"
From: On: 30 Dec 2019
alles bestens, schneller Versand - top Qualität !!!
From: On: 5 Dec 2019
Alles super Danke
From: On: 4 Dec 2019
Tolles Produkt
From: On: 3 Dec 2019
Wunderbar
From: On: 2 Dec 2019
Hat alles super funktioniert und schneller Versand
From: On: 17 Jul 2019
Alles OK. Gerne wieder.
From: On: 17 Dec 2017
Quality product, great help and Quick service
Write an evaluation
Evaluations will be activated after verification.
Viewed