Deutsch
English
Français
Speedometer display for PORSCHE 996 Boxster 986 instrument cluster km/h version SET
km/h version
Description:
If the display on your vehicle only works incompletely or if it has stopped or started up, then the cause is usually defective displays and/or their control contacts. With the help of this offer, you as a hobby screwdriver can repair your instrument easily and independently
Soldering skills are required to mount the middle display as the conductor foil has to be soldered in!
A puller for the speedometer needle and a T-soldering tip are included in the scope of delivery for the outer displays. This must be heated with a soldering iron so that the display conductor foil can be ironed on. No soldering is necessary for the outer displays as they are ironed on.
Variants:
These are all three displays in the instrument cluster. (See illustration). The displays fit speedometers with kmh display. The mph variant can be found under item number 6079.
Quality:
Thanks to our many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and designs that are 100% true to the original. Occasionally, cheap replicas with dangerous quality deficiencies come onto the market:We cannot offer advice on installation and subsequent problems on instruments caused by third-party products. We ask for your understanding.
Dimensions of the display glass overall: 28.5 x 45.5 mm / 45 x 62 mm / 28.5 x 45 mm
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
99664110501, 996.641.105.01, 996 641 105 01
99664110502, 996.641.105.02, 996 641 105 02
99664110601, 996.641.106.01, 996 641 106 01
99664110602, 996.641.106.02, 996 641 106 02
99664110701, 996.641.107.01, 996 641 107 01
99664110702, 996.641.107.02, 996 641 107 02
99664110801, 996.641.108.01, 996 641 108 01
99664110802, 996.641.108.02, 996 641 108 02
99664111500, 996.641.115.00, 996 641 115 00
99664111503, 996.641.115.03, 996 641 115 03
99664111603, 996.641.116.03, 996 641 116 03
99664111703, 996.641.117.03, 996 641 117 03
99664111803, 996.641.118.03, 996 641 118 03
99664121592, 996.641.215.92, 996 641 215 92
99664122502, 996.641.225.02, 996 641 225 02
99664122503, 996.641.225.03, 996 641 225 03
99664122603, 996.641.226.03, 996 641 226 03
99664122702, 996.641.227.02, 996 641 227 02
99664122703, 996.641.227.03, 996 641 227 03
9966412
Scope of delivery:
3 displays, 1 speedometer needle puller, 1 T-soldering tip
Suitable for:
996 '97 - 09/'01
Boxster 986 '96 - 06/'02
NOT for facelift models
km/h version
Description:
If the display on your vehicle only works incompletely or if it has stopped or started up, then the cause is usually defective displays and/or their control contacts. With the help of this offer, you as a hobby screwdriver can repair your instrument easily and independently
Soldering skills are required to mount the middle display as the conductor foil has to be soldered in!
A puller for the speedometer needle and a T-soldering tip are included in the scope of delivery for the outer displays. This must be heated with a soldering iron so that the display conductor foil can be ironed on. No soldering is necessary for the outer displays as they are ironed on.
Variants:
These are all three displays in the instrument cluster. (See illustration). The displays fit speedometers with kmh display. The mph variant can be found under item number 6079.
Quality:
Thanks to our many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and designs that are 100% true to the original. Occasionally, cheap replicas with dangerous quality deficiencies come onto the market:We cannot offer advice on installation and subsequent problems on instruments caused by third-party products. We ask for your understanding.
Dimensions of the display glass overall: 28.5 x 45.5 mm / 45 x 62 mm / 28.5 x 45 mm
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
99664110501, 996.641.105.01, 996 641 105 01
99664110502, 996.641.105.02, 996 641 105 02
99664110601, 996.641.106.01, 996 641 106 01
99664110602, 996.641.106.02, 996 641 106 02
99664110701, 996.641.107.01, 996 641 107 01
99664110702, 996.641.107.02, 996 641 107 02
99664110801, 996.641.108.01, 996 641 108 01
99664110802, 996.641.108.02, 996 641 108 02
99664111500, 996.641.115.00, 996 641 115 00
99664111503, 996.641.115.03, 996 641 115 03
99664111603, 996.641.116.03, 996 641 116 03
99664111703, 996.641.117.03, 996 641 117 03
99664111803, 996.641.118.03, 996 641 118 03
99664121592, 996.641.215.92, 996 641 215 92
99664122502, 996.641.225.02, 996 641 225 02
99664122503, 996.641.225.03, 996 641 225 03
99664122603, 996.641.226.03, 996 641 226 03
99664122702, 996.641.227.02, 996 641 227 02
99664122703, 996.641.227.03, 996 641 227 03
9966412
Scope of delivery:
3 displays, 1 speedometer needle puller, 1 T-soldering tip
Suitable for:
996 '97 - 09/'01
Boxster 986 '96 - 06/'02
NOT for facelift models
Review product
Disclaimer: The reviews are not checked for authenticity before they are published. They can therefore also come from consumers who have not actually purchased/used the rated products.
No review available for this product.