Speedometer gear wheel for mechanical VDO odometer roller gear wheel D2,2

Speedometer gear wheel for mechanical VDO odometer roller gear wheel D2,2

Description:
There are two weak points in the odometers of the mechanical speedometers:
The first is the gear wheel at the extreme end of the odometer shaft.
The second is this roller wheel: it very often tears radially with a fine hairline crack. This means that it no longer sits firmly on the shaft, but can be turned with a small screwdriver.

There are three different variants:
A) Total width 4.5mm; tooth width 1.3 mm
B) Total width 5.4 mm; tooth width 2.2 mm
C) Total width 6.0mm; tooth width 3.0 mm

Simply measure the tooth width of the roller gear. We have all three variants available and usually also online.
The respective auction title indicates the variant with D1.3 or D2.2 or D3.0.

The gear wheels are suitable for all mechanical VDO speedometers from various vehicle brands. Unfortunately, we cannot specify the exact dimensions for all models, so simply check by measuring.

Note:
We strongly recommend that you also replace the other gear (driven by the worm) if you have dismantled and opened the speedometer anyway. Look in the store for the right sizes. They are called M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M21, M25 and differ in the number of teeth.

If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grip the speedometer needle in the center and turn it counterclockwise. Pull gently. Friction is all that keeps the needle on the shaft.

partworks GmbH is a German company that specializes in reverse engineering and the sale of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans around the world are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. That's why you can be sure that the requirements for new developments are based very closely on the original and sometimes even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO-9001-certified quality management confirms the thoroughness of our work. If you see the manufacturer specification partworks, this means that it is either an in-house development or an article from an original equipment manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active on the open market under their own brand.

Scope of delivery:
see illustration

Suitable for:
general