Article successfully added.
23.33€* 29.33€*
Prices incl. VAT plus shipping costs
Available immediately
This item will be shipped today if you order within 9 hours and 44 minutes!
- Order number: 2302
- Manufacturer: partworks
Instrument cluster gear for PORSCHE 911 SC 944 2.5 S S2 speedometer 20x30 excellent... more
Instrument cluster gear for PORSCHE 911 SC 944 2.5 S S2 speedometer 20x30
excellent workmanship quality
Description:
If the odometer/trip meter has failed on your vehicle, this gear is almost always the cause. The original beige-brown gears crumble over the years due to a material defect and have to be replaced.
Variants:
Most 911 G models (and some 944s) have this 20x30 installed! However, the 20x21 or 20x22 can also be installed in the 944. You can find these in the shop using the search e.g. "20x21".
We can say with great certainty, but not with 100% certainty, which model has which gear size. Too many influencing factors come into play here (engine type/gearbox type/gear ratio/differential type/year of manufacture/model).
However, the following data reliably helps to determine the right gear:
20x21 (17.60mm/9.00mm) number of teeth opposite partner gear: 49 teeth 911/928 mph/944
20x22 (17.60mm/9.40mm) Number of teeth opposite partner gear: 48 teeth 911/944 mph
20x23 (17.60mm/9.65mm) Number of teeth opposite partner gear: 47 teeth 944(S2)/911(G)
20x29 (17.60mm/12.05mm) Number of teeth opposite partner gear: 41 teeth some 928 km/h
20x30 (17.60mm/12.55mm) number of teeth opposite partner gear: 40 teeth 911/944
20x32 (17.60mm/13.40mm) number of teeth opposite partner gear: 38 teeth 928 km/h
Simply count the teeth of the gear that this gear meshes with and/or use the measurements to help you.
Service:
We have over 100 gear variants in our range and can supply the right gears if required!
+ all alternative sizes always in stock
+ fast exchange service in the event of a size discrepancy
For the repair, we will send you illustrated repair instructions (German/English) by email. You can also find suitable repair videos on YouTube.
Advantages:
Buying a used speedometer saves you from having to repair it initially, but carries the risk that the gear will break in the near future. Storage times and cold temperatures in particular cause additional damage to the gears. Due to incorrect material choice by VDO, all original gears of this type will break over time!
If you have dismantled the speedometer, we also recommend replacing the light bulbs. These noticeably lose performance over the years.
Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grip the center of the speedometer needle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Additional Information:
● Large gear diameter: 17.6mm
● Number of teeth on large gear: 20
● Small gear diameter: 12.55mm
● Number of teeth small gear: 30
Reference numbers:
Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here:
911641516FX, 911.641.516.FX, 911 641 516 FX
92864110331, 928.641.103.31, 928 641 103 31
94464131136, 944.641.311.36, 944 641 311 36
99664131136, 996.641.311.36, 996 641 311 36
110008229001
110008326064
91164151606, 911.641.516.06, 911 641 516 06
91164151603, 911.641.516.03, 911 641 516 03
Scope of delivery:
1 gear
Suitable for:
Porsche 911 (75-89) (older models = mechanical speedometers have the M17 installed)
Porsche 944-II (from 05.85) (older models = mechanical speedometers have the M11/M15/M17 installed)
Most 911 G models (and some 944) have this 20x30 installed!
However, the 20x21 can also be installed in the 944.
However, the 20x22 can also be installed in the 911. You can find these in the shop using the search e.g. "20x21"
We can do so with great certainty
but cannot say with 100% certainty
which model has which gear size installed. Too many influencing factors come into play here (engine type/gearbox type/gear ratio/differential type/year of manufacture/model). If, contrary to expectations, you need a different gear
excellent workmanship quality
Description:
If the odometer/trip meter has failed on your vehicle, this gear is almost always the cause. The original beige-brown gears crumble over the years due to a material defect and have to be replaced.
Variants:
Most 911 G models (and some 944s) have this 20x30 installed! However, the 20x21 or 20x22 can also be installed in the 944. You can find these in the shop using the search e.g. "20x21".
We can say with great certainty, but not with 100% certainty, which model has which gear size. Too many influencing factors come into play here (engine type/gearbox type/gear ratio/differential type/year of manufacture/model).
However, the following data reliably helps to determine the right gear:
20x21 (17.60mm/9.00mm) number of teeth opposite partner gear: 49 teeth 911/928 mph/944
20x22 (17.60mm/9.40mm) Number of teeth opposite partner gear: 48 teeth 911/944 mph
20x23 (17.60mm/9.65mm) Number of teeth opposite partner gear: 47 teeth 944(S2)/911(G)
20x29 (17.60mm/12.05mm) Number of teeth opposite partner gear: 41 teeth some 928 km/h
20x30 (17.60mm/12.55mm) number of teeth opposite partner gear: 40 teeth 911/944
20x32 (17.60mm/13.40mm) number of teeth opposite partner gear: 38 teeth 928 km/h
Simply count the teeth of the gear that this gear meshes with and/or use the measurements to help you.
Service:
We have over 100 gear variants in our range and can supply the right gears if required!
+ all alternative sizes always in stock
+ fast exchange service in the event of a size discrepancy
For the repair, we will send you illustrated repair instructions (German/English) by email. You can also find suitable repair videos on YouTube.
Advantages:
Buying a used speedometer saves you from having to repair it initially, but carries the risk that the gear will break in the near future. Storage times and cold temperatures in particular cause additional damage to the gears. Due to incorrect material choice by VDO, all original gears of this type will break over time!
If you have dismantled the speedometer, we also recommend replacing the light bulbs. These noticeably lose performance over the years.
Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grip the center of the speedometer needle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Additional Information:
● Large gear diameter: 17.6mm
● Number of teeth on large gear: 20
● Small gear diameter: 12.55mm
● Number of teeth small gear: 30
Reference numbers:
Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here:
911641516FX, 911.641.516.FX, 911 641 516 FX
92864110331, 928.641.103.31, 928 641 103 31
94464131136, 944.641.311.36, 944 641 311 36
99664131136, 996.641.311.36, 996 641 311 36
110008229001
110008326064
91164151606, 911.641.516.06, 911 641 516 06
91164151603, 911.641.516.03, 911 641 516 03
Scope of delivery:
1 gear
Suitable for:
Porsche 911 (75-89) (older models = mechanical speedometers have the M17 installed)
Porsche 944-II (from 05.85) (older models = mechanical speedometers have the M11/M15/M17 installed)
Most 911 G models (and some 944) have this 20x30 installed!
However, the 20x21 can also be installed in the 944.
However, the 20x22 can also be installed in the 911. You can find these in the shop using the search e.g. "20x21"
We can do so with great certainty
but cannot say with 100% certainty
which model has which gear size installed. Too many influencing factors come into play here (engine type/gearbox type/gear ratio/differential type/year of manufacture/model). If, contrary to expectations, you need a different gear
Related links to "Instrument cluster gear for PORSCHE 911 SC 944 2.5 S S2 speedometer 20x30"
Brand | Model | Type | Platform | Year of manufacture | Motor | Restrictions |
Porsche | 911 | 2.7 SC Carrera RS | 911 F | 1972/08-1979/01 | 2687 ccm, 154 KW, 209 PS | |
Porsche | 911 | 2.7 S Carrera | 911 F | 1973/08-1976/01 | 2687 ccm, 129 KW, 175 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1977/07-1980/06 | 2993 ccm, 132 KW, 180 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1979/09-1980/06 | 2993 ccm, 138 KW, 188 PS | |
Porsche | 911 | 3.2 | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1975/09-1977/06 | 2993 ccm, 147 KW, 200 PS | |
Porsche | 911 | 3.2 Carrera | 911 G | 1983/08-1989/08 | 3164 ccm, 170 KW, 231 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1974/03-1983/10 | 2993 ccm, 154 KW, 209 PS | |
Porsche | 911 | 2.7 | 911 G | 1975/09-1977/06 | 2687 ccm, 121 KW, 165 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1980/08-1983/07 | 2993 ccm, 150 KW, 204 PS | |
Porsche | 911 | 3.2 Carrera | 911 G | 1984/02-1987/06 | 3164 ccm, 152 KW, 207 PS | |
Porsche | 911 | 3.3 Turbo | 930 Turbo | 1986/06-1989/08 | 3299 ccm, 221 KW, 300 PS | |
Porsche | 911 | 3.3 Turbo | 930 Turbo | 1986/09-1990/11 | 3299 ccm, 243 KW, 330 PS | |
Porsche | 911 | 3.3 Turbo | 930 Turbo | 1977/09-1987/06 | 3299 ccm, 221 KW, 301 PS | |
Porsche | 911 Targa | 2.7 SC Carrera RS | 911 F | 1972/08-1979/01 | 2687 ccm, 154 KW, 209 PS | |
Porsche | 911 Targa | 3.0 SC | 911 G | 1979/09-1980/06 | 2993 ccm, 138 KW, 188 PS | |
Porsche | 911 Targa | 2.7 | 911 G | 1973/09-1975/08 | 2687 ccm, 110 KW, 150 PS | |
Porsche | 911 Targa | 2.7 S | 911 G | 1973/08-1976/01 | 2687 ccm, 129 KW, 175 PS | |
Porsche | 911 Targa | 2.7 | 911 G | 1975/09-1977/06 | 2687 ccm, 121 KW, 165 PS | |
Porsche | 911 Targa | 3.0 SC | 911 G | 1975/09-1977/06 | 2993 ccm, 147 KW, 200 PS | |
Porsche | 911 Targa | 3.0 SC | 911 G | 1977/07-1980/06 | 2993 ccm, 132 KW, 180 PS | |
Porsche | 911 Targa | 3.3 Turbo | 930 Turbo | 1986/09-1990/11 | 3299 ccm, 221 KW, 301 PS | |
Porsche | 944 | 2.5 S | -- | 1986/08-1988/07 | 2479 ccm, 140 KW, 190 PS | |
Porsche | 944 | 2.5 Turbo | -- | 1985/08-1988/07 | 2479 ccm, 162 KW, 220 PS | |
Porsche | 944 | 2.5 | -- | 1985/01-1987/07 | 2479 ccm, 110 KW, 150 PS | |
Porsche | 944 | 2.5 Turbo | -- | 1987/09-1991/07 | 2479 ccm, 184 KW, 250 PS | |
Porsche | 944 | 2.5 | -- | 1987/08-1990/12 | 2479 ccm, 118 KW, 160 PS | |
Porsche | 944 | 2.7 | -- | 1988/11-1989/08 | 2681 ccm, 121 KW, 165 PS | |
Porsche | 944 | 2.5 | -- | 1981/06-1987/07 | 2479 ccm, 120 KW, 163 PS | |
Porsche | 944 | 3.0 S2 | -- | 1988/12-1991/07 | 2990 ccm, 155 KW, 211 PS | |
Porsche | 911 Cabriolet | 3.0 SC | 911 G | 1982/08-1983/07 | 2993 ccm, 150 KW, 204 PS | |
Porsche | 911 Cabriolet | 3.2 Carrera | 911 G | 1984/10-1989/08 | 3164 ccm, 152 KW, 207 PS | |
Porsche | 911 Cabriolet | 3.2 Carrera Speedster | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | |
Porsche | 911 Cabriolet | 3.2 Carrera | 911 G | 1983/08-1984/08 | 3164 ccm, 170 KW, 231 PS | |
Porsche | 944 Cabriolet | 3.0 S2 | -- | 1988/12-1991/07 | 2990 ccm, 155 KW, 211 PS | |
Porsche | 944 Cabriolet | 2.5 Turbo | -- | 1990/11-1991/07 | 2479 ccm, 184 KW, 250 PS |
Read, write and discuss reviews... more
Customer evaluation for "Instrument cluster gear for PORSCHE 911 SC 944 2.5 S S2 speedometer 20x30"
Write an evaluation
Evaluations will be activated after verification.
Viewed