Digital clock for PORSCHE 944 951 clock in exchange

Digital clock for PORSCHE 944 951 clock in exchange

Description:
The old LCDs suffer from the need for a long service life and stop working after more than a decade of use. The climate control display is also a typical defective component in the Porsche 944 and 968CS.

Perfomance:
This offer includes a repaired Porsche 944 / 968CS digital watch in exchange for your defective watch.
We can replace separated conductor tracks, burnt-out capacitors, transistors and damaged housings, as well as scratched buttons and have a generous supply of spare parts. Basically, every watch receives a new, true-to-original display, conductor strips and new lamps. All components are cleaned before assembly. (Please note that we cannot repair watches with broken circuit boards).

Installation/removal instructions:
1. Remove the triangular black plastic cover at the end of the dashboard, accessible when the passenger door is open.
2. Loosen the screw underneath on the long, thin switch strip.
3. Carefully remove the knobs on the two heater/air conditioning control sliders using a small flathead screwdriver or plastic putty knife.
4. Carefully remove the heater/air conditioning control cover panel from the side using a plastic putty knife or very small flathead screwdriver. The cover is attached with four (two at the top, two at the bottom) small clips. Be careful, the old plastic parts break easily. Loosen all four screws on the control panel and pull it forward one centimeter.
5. Carefully turn the inner sensor rosette (small, round grille) by approximately 30 degrees to then remove it. Loosen the screw behind it.
6. Using a small slotted screwdriver, loosen the cover to the left of the right fan grille and the screws behind it.
7. Now you can easily remove the switch strip and loosen the clock with its 2 screw connections. The somewhat stiff plug is not clipped and is simply removed.
8. Keep the screws safe and look forward to your new watch. Installation is the reverse order.

A notice:
Make sure that the hose of the internal sensor has not slipped and ideally use a cable tie to secure it.
Duration:10 minutes

Tip:
Avoid buying a digital watch that is “still” intact but has never been completely refurbished. It is only a matter of time before this also stops working. Better yet, save time, money and hassle.

Process:
1. Purchasing a repair.
2. Transfer of the additional deposit amount (to the same PayPal address)
3. Receiving a refurbished watch
4. Returning the old watch
5. Receipt of the deposit after your old watch arrives (if paying by bank transfer, please provide bank details!)

+ fast processing
+ You can exchange old for new directly on the car
+ possible optical defects are eliminated

International Customers, please be aware that this is an auction “in exchange” for your old, defective item. Only available for EU countries. We do also have an auction without exchange, take a look at our shop.

Deposit amount: €100

No programming or anything similar is required after the repair.

We all know the Porsche brand. The parts we distribute here are new original parts - not used parts. Some Porsche items are not available on the open market or are difficult to obtain. We look for exactly these spare parts for you worldwide so that we can offer you an extensive portfolio and you can get all the parts from us that are otherwise difficult to find. We want to make things available to you so that your Porsche can continue to be looked after and cared for.

Reference numbers:
9446419130001C
94464191300,   944.641.913.00,   944 641 913 00
9446412130001C
94464121300,   944.641.213.00,   944 641 213 00


Scope of delivery:
1 digital clock in exchange

Suitable for:
Porsche 944/968CS

Deposit amount:
100€