Article successfully added.
![Special wrench for PORSCHE 924S 944 968 timing belt change open-end wrench 27mm](https://partworks.de/media/image/a2/0c/59/1130___GM7_5428_clipped_rev_1-uPhJ_600x600.jpg.pagespeed.ce.QioLE_trt5.jpg)
25.43€*
31.43€*
Prices incl. VAT plus shipping costs
Available immediately
This item will be shipped today if you order within 16 hours and 6 minutes!
- Order number: 1130
- Manufacturer: partworks
Special wrench for PORSCHE 924S 944 968 timing belt change open-end wrench 27mm Quality:... more
Special wrench for PORSCHE 924S 944 968 timing belt change open-end wrench 27mm
Quality: “Made in Germany”
Description:
The tool is used to loosen and tighten the hard-to-reach running/tensioning rollers and enables safe and defined tightening. The tool was developed specifically for this application and enables the balance shaft belts and/or timing belts to be changed professionally. The narrow design of the wrench mouth and the double offset offer the best possible access to the wrench surfaces behind the rollers.
Quality:
The key comes from our own design and is 100% German-made. The material and component geometry were designed for the maximum load cases in this application. Galvanic blue galvanizing serves as corrosion protection.
A notice:
Older tension pulleys have 24mm wrench flats on the pulleys. You can also find a 24mm open-end wrench for this in the shop.
We also have locking keys for crankshafts and balancer shafts as well as complete tool sets in our range.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
00072192440, 000.721.924.40, 000 721 924 40
72192440
Scope of delivery:
1 x open-end wrench (WITHOUT ROLLER)
Suitable for:
924S
944
968
Quality: “Made in Germany”
Description:
The tool is used to loosen and tighten the hard-to-reach running/tensioning rollers and enables safe and defined tightening. The tool was developed specifically for this application and enables the balance shaft belts and/or timing belts to be changed professionally. The narrow design of the wrench mouth and the double offset offer the best possible access to the wrench surfaces behind the rollers.
Quality:
The key comes from our own design and is 100% German-made. The material and component geometry were designed for the maximum load cases in this application. Galvanic blue galvanizing serves as corrosion protection.
A notice:
Older tension pulleys have 24mm wrench flats on the pulleys. You can also find a 24mm open-end wrench for this in the shop.
We also have locking keys for crankshafts and balancer shafts as well as complete tool sets in our range.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
00072192440, 000.721.924.40, 000 721 924 40
72192440
Scope of delivery:
1 x open-end wrench (WITHOUT ROLLER)
Suitable for:
924S
944
968
Related links to "Special wrench for PORSCHE 924S 944 968 timing belt change open-end wrench 27mm"
Brand | Model | Type | Platform | Year of manufacture | Motor | Restrictions |
Porsche | 924 | 2.5 S | -- | 1987/08-1988/07 | 2479 ccm, 118 KW, 160 PS | |
Porsche | 924 | 2.5 S | -- | 1981/10-1984/12 | 2479 ccm, 120 KW, 163 PS | |
Porsche | 924 | 2.5 S | -- | 1985/09-1987/07 | 2479 ccm, 110 KW, 150 PS | |
Porsche | 944 | 2.5 S | -- | 1986/08-1988/07 | 2479 ccm, 140 KW, 190 PS | |
Porsche | 944 | 2.5 | -- | 1981/06-1987/07 | 2479 ccm, 120 KW, 163 PS | |
Porsche | 944 | 2.5 | -- | 1987/08-1990/12 | 2479 ccm, 118 KW, 160 PS | |
Porsche | 944 | 2.5 Turbo | -- | 1987/09-1991/07 | 2479 ccm, 184 KW, 250 PS | |
Porsche | 944 | 2.5 | -- | 1985/01-1987/07 | 2479 ccm, 110 KW, 150 PS | |
Porsche | 944 | 2.7 | -- | 1988/11-1989/08 | 2681 ccm, 121 KW, 165 PS | |
Porsche | 944 | 2.5 Turbo | -- | 1985/08-1988/07 | 2479 ccm, 162 KW, 220 PS | |
Porsche | 944 | 3.0 S2 | -- | 1988/12-1991/07 | 2990 ccm, 155 KW, 211 PS | |
Porsche | 944 Cabriolet | 3.0 S2 | -- | 1988/12-1991/07 | 2990 ccm, 155 KW, 211 PS | |
Porsche | 944 Cabriolet | 2.5 Turbo | -- | 1990/11-1991/07 | 2479 ccm, 184 KW, 250 PS | |
Porsche | 968 | 3.0 | -- | 1991/06-1995/11 | 2990 ccm, 176 KW, 239 PS | |
Porsche | 968 | 3.0 Turbo S | -- | 1993/03-1995/11 | 2990 ccm, 224 KW, 305 PS | |
Porsche | 968 Cabriolet | 3.0 | -- | 1991/06-1995/11 | 2990 ccm, 176 KW, 239 PS |
Read, write and discuss reviews... more
Customer evaluation for "Special wrench for PORSCHE 924S 944 968 timing belt change open-end wrench 27mm"
Write an evaluation
Evaluations will be activated after verification.
Viewed