Repair service outside temperature display for PORSCHE 968

Repair service outside temperature display for PORSCHE 968

We will repair your ad true to the original!

Description:
Most displays are defective after more than 20 years of use. Used ones that still work are rare, are highly valued and can fail at any time.
In this offer you purchase the repair service for your own outside temperature display.

Scope of services:
+ Repair of the display element
+ Renewal of the lead contacts
+ Cleaning
+ Functional test
+ Invoice with VAT shown

Process:
1. Purchase this repair service.
2. Send your own watch to our address, please include the return address!
3. Receipt of the refurbished digital watch after approximately 7 working days

Address:
partworks GmbH
Otto-Stadler-Str. 9c
D-33100 Paderborn

Instructions for installation/removal:
1. Remove the triangular black plastic cover at the end of the dashboard, accessible when the passenger door is open.
2. Loosen the screw underneath on the long, thin switch strip.
3. Carefully remove the knobs on the two heater/air conditioning control sliders using a small flathead screwdriver or plastic putty knife.
4. Carefully remove the heater/air conditioning control cover panel from the side using a plastic putty knife or very small flathead screwdriver. The cover is attached with four (two at the top, two at the bottom) small clips. Be careful, the old plastic parts break easily. Loosen all four screws on the control panel and pull it forward one centimeter.
5. Carefully turn the inner sensor rosette (small, round grid) by approximately 30 degrees to then remove it. Loosen the screw behind it.
6. Using a small slotted screwdriver, loosen the cover to the left of the right fan grille and the screws behind it.
7. Now you can easily remove the switch strip and loosen the ATA with 2 screw connections. The somewhat stiff plug is not clipped and is simply removed.
8. Keep the screws safe and send us only the display module. Installation is the reverse order.

A notice:
Make sure that the hose of the internal sensor has not slipped and ideally use a cable tie to secure it.

Duration:
15 minutes

Tip:
Avoid buying an ATA that is (still) intact but has never been refurbished. It is only a matter of time before this also stops working. You'd better save time, money and hassle.

International Customers, please be aware that this is a repair service, the gauge itself is not included.

We all know the Porsche brand. The parts we distribute here are new original parts - not used parts. Some Porsche items are not available on the open market or are difficult to obtain. We look for exactly these spare parts for you worldwide so that we can offer you an extensive portfolio and you can get all the parts from us that are otherwise difficult to find. We want to make things available to you so that your Porsche can continue to be looked after and cared for.

Reference numbers:
94464122300,   944.641.223.00,   944 641 223 00
9446412230001C


Scope of delivery:
see illustration

Suitable for:
Porsche 968
NOT for 968CS because the 944 digital clock is installed here

Product Safety Information:
Manufacturer:
Dr. Ing. h.c. F. Porsche AG
Porscheplatz 1
70435 Stuttgart - DE
Email: info@porsche.de
Website: https://www.porsche.com/