Article successfully added.
171.29€*
178.43€*
Prices incl. VAT plus shipping costs
Available immediately
This item will be shipped today if you order within 8 hours and 7 minutes!
- Order number: 1061
- Manufacturer: partworks Set
2x tie rods + steering boots for PORSCHE 928 4.5 928S up to -'86 + boot Good and affordable... more
2x tie rods + steering boots for PORSCHE 928 4.5 928S up to -'86 + boot
Good and affordable - also available as a premium version
Description:
The joints on track rods are subject to wear, which usually starts with a torn boot. Once the grease has been washed out of the axial joint or tie rod end, the ball joint will fail within a few thousand kilometers. The defective rubber sleeves or rod ends will be rejected by the TÜV at the latest. Depending on the Porsche model, the track rods can consist of two or three main components. These include the axial joint as the inner ball joint in front of the steering gear and the so-called tie rod end at the outer end of the tie rod. Sometimes the axial joint and tie rod end are also directly connected, as in the 924/944 and 968. Because replacing the tie rod always requires a new wheel alignment with toe-in adjustment, it is also advisable to replace the tie rod completely, depending on its condition. On the 924/944, the track rods differ in length AND whether they have internal/external threads on the head. If in doubt, you can also check your thread type and visually compare it. Another difference: With the 1987 model year, the 944 received the so-called "wide axle". The tie rod ends of cars with power steering and/or a wide axle always have an external thread and are screwed onto the rods.
This product is a set of branded goods from renowned automotive suppliers created by partworks. If we identify the manufacturer of the components, for example by cardboard packaging, it will also be a set component from this manufacturer. However, please do not forget that even the largest suppliers sometimes trade with each other. In any case, you can always rely on the high quality standards of our components.
Reference numbers:
92834703110, 928.347.031.10, 928 347 031 10
92834703101, 928.347.031.01, 928 347 031 01
92834703103, 928.347.031.03, 928 347 031 03
92834719103, 928.347.191.03, 928 347 191 03
92834719102, 928.347.191.02, 928 347 191 02
Scope of delivery:
According to illustration
Suitable for:
928 4.5/928S up to 12/85
NOT for 928 from model year 1986 ->these require #6995
Tie rod length without tie rod end 255mm
Good and affordable - also available as a premium version
Description:
The joints on track rods are subject to wear, which usually starts with a torn boot. Once the grease has been washed out of the axial joint or tie rod end, the ball joint will fail within a few thousand kilometers. The defective rubber sleeves or rod ends will be rejected by the TÜV at the latest. Depending on the Porsche model, the track rods can consist of two or three main components. These include the axial joint as the inner ball joint in front of the steering gear and the so-called tie rod end at the outer end of the tie rod. Sometimes the axial joint and tie rod end are also directly connected, as in the 924/944 and 968. Because replacing the tie rod always requires a new wheel alignment with toe-in adjustment, it is also advisable to replace the tie rod completely, depending on its condition. On the 924/944, the track rods differ in length AND whether they have internal/external threads on the head. If in doubt, you can also check your thread type and visually compare it. Another difference: With the 1987 model year, the 944 received the so-called "wide axle". The tie rod ends of cars with power steering and/or a wide axle always have an external thread and are screwed onto the rods.
This product is a set of branded goods from renowned automotive suppliers created by partworks. If we identify the manufacturer of the components, for example by cardboard packaging, it will also be a set component from this manufacturer. However, please do not forget that even the largest suppliers sometimes trade with each other. In any case, you can always rely on the high quality standards of our components.
Reference numbers:
92834703110, 928.347.031.10, 928 347 031 10
92834703101, 928.347.031.01, 928 347 031 01
92834703103, 928.347.031.03, 928 347 031 03
92834719103, 928.347.191.03, 928 347 191 03
92834719102, 928.347.191.02, 928 347 191 02
Scope of delivery:
According to illustration
Suitable for:
928 4.5/928S up to 12/85
NOT for 928 from model year 1986 ->these require #6995
Tie rod length without tie rod end 255mm
Related links to "2x tie rods + steering boots for PORSCHE 928 4.5 928S up to -'86 + boot"
Brand | Model | Type | Platform | Year of manufacture | Motor | Restrictions |
Porsche | 928 | 5.0 S | -- | 1984/09-1985/12 | 4957 ccm, 200 KW, 272 PS | |
Porsche | 928 | 4.5 | -- | 1977/09-1979/12 | 4474 ccm, 169 KW, 230 PS | |
Porsche | 928 | 5.0 S | -- | 1985/09-1986/12 | 4957 ccm, 212 KW, 288 PS | NUR bis '85 / siehe Beschreibung |
Porsche | 928 | 4.5 | -- | 1977/09-1982/08 | 4474 ccm, 177 KW, 241 PS | |
Porsche | 928 | 5.0 S | -- | 1985/09-1986/12 | 4957 ccm, 215 KW, 292 PS | NUR bis '85 / siehe Beschreibung |
Porsche | 928 | 4.5 | -- | 1979/09-1982/12 | 4474 ccm, 170 KW, 231 PS | |
Porsche | 928 | 4.7 S | -- | 1979/09-1983/07 | 4664 ccm, 221 KW, 301 PS | |
Porsche | 928 | 4.7 S | -- | 1982/09-1984/12 | 4664 ccm, 178 KW, 242 PS | |
Porsche | 928 | 4.7 S | -- | 1983/08-1986/07 | 4664 ccm, 228 KW, 310 PS |
Read, write and discuss reviews... more
Customer evaluation for "2x tie rods + steering boots for PORSCHE 928 4.5 928S up to -'86 + boot"
Write an evaluation
Evaluations will be activated after verification.
Viewed