Article successfully added.
44.33€*
50.33€*
Prices incl. VAT plus shipping costs
Available immediately
This item will be shipped today if you order within 16 hours and 12 minutes!
- Order number: 2313
- Manufacturer: partworks
Speedometer gears combination instrument for PORSCHE 968 counter E15 + 12-K SET Attention,... more
Speedometer gears combination instrument for PORSCHE 968 counter E15 + 12-K SET
Attention, other variants are also possible for the large gear!
Description:
If the odometer/trip meter has failed on your vehicle, then one or both of these gears are usually the cause.
To avoid double assembly work, we recommend replacing both gears.
Illustration/labeling only as an example!
Mass:
Diameter E15 = 6.90mm (15 teeth)
Disc gear 12-K = 15.40mm (12 teeth)
Service:
We have over 100 gear variants in our range and can supply the right gears if required!
For the repair, we can send you an example repair manual (English) with pictures of a 911 speedometer. Simply write to us by email.
Questions:
by email info@partworks.de
Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
Components have been tested over many years of use
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grab the speedometer needle in the middle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here:
94464195126, 944.641.951.26, 944 641 951 26
94464195127, 944.641.951.27, 944 641 951 27
94464195128, 944.641.951.28, 944 641 951 28
94464195122, 944.641.951.22, 944 641 951 22
94464195123, 944.641.951.23, 944 641 951 23
94464195124, 944.641.951.24, 944 641 951 24
Scope of delivery:
see illustration
Suitable for:
all 968
The E15 + 16-K gear combination is also occasionally installed.
You should only notice after purchasing
that your model requires the other combination
We offer a free and fast exchange service. Simply send us the 16-K gear with a corresponding one
Attention, other variants are also possible for the large gear!
Description:
If the odometer/trip meter has failed on your vehicle, then one or both of these gears are usually the cause.
To avoid double assembly work, we recommend replacing both gears.
Illustration/labeling only as an example!
Mass:
Diameter E15 = 6.90mm (15 teeth)
Disc gear 12-K = 15.40mm (12 teeth)
Service:
We have over 100 gear variants in our range and can supply the right gears if required!
For the repair, we can send you an example repair manual (English) with pictures of a 911 speedometer. Simply write to us by email.
Questions:
by email info@partworks.de
Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
Components have been tested over many years of use
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grab the speedometer needle in the middle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here:
94464195126, 944.641.951.26, 944 641 951 26
94464195127, 944.641.951.27, 944 641 951 27
94464195128, 944.641.951.28, 944 641 951 28
94464195122, 944.641.951.22, 944 641 951 22
94464195123, 944.641.951.23, 944 641 951 23
94464195124, 944.641.951.24, 944 641 951 24
Scope of delivery:
see illustration
Suitable for:
all 968
The E15 + 16-K gear combination is also occasionally installed.
You should only notice after purchasing
that your model requires the other combination
We offer a free and fast exchange service. Simply send us the 16-K gear with a corresponding one
Related links to "Speedometer gears combination instrument for PORSCHE 968 counter E15 + 12-K SET"
Brand | Model | Type | Platform | Year of manufacture | Motor | Restrictions |
Porsche | 968 | 3.0 | -- | 1991/06-1995/11 | 2990 ccm, 176 KW, 239 PS | siehe Beschreibung |
Porsche | 968 | 3.0 Turbo S | -- | 1993/03-1995/11 | 2990 ccm, 224 KW, 305 PS | siehe Beschreibung |
Porsche | 968 Cabriolet | 3.0 | -- | 1991/06-1995/11 | 2990 ccm, 176 KW, 239 PS | siehe Beschreibung |
Read, write and discuss reviews... more
Customer evaluation for "Speedometer gears combination instrument for PORSCHE 968 counter E15 + 12-K SET"
Write an evaluation
Evaluations will be activated after verification.
Hint!
Viewed