Gear for VDO Sumlog 8KN Logge Tacho Knot Gauge

Gear for VDO Sumlog 8KN Logge Tacho Knot Gauge

Attention, there are several gear variants, please read the description carefully!

Description:
If the odometer or operating hours counter on your vehicle has failed, then this drive gear in the instrument is usually the cause. Unsuitable materials cause the original gears to disintegrate or crack radially. With the help of this offer, every hobby screwdriver can easily repair their instrument themselves and saves themselves costly contract repairs, waiting times and shipping costs for the entire instrument.

Gear sets:
Some counter drives contain more than one vulnerable gear. Here we strongly recommend that you change all critical pinions in order to avoid double assembly effort: the neighboring gear often fails immediately after the first gear has been replaced. Simply look for the right set in our shop and enter your vehicle as a search term + "gear" (e.g. "Mercedes SL gear").

A notice:
The number of teeth in the instrument drives also varies within a model depending on the engine and gearbox type as well as the differential ratio and country code. Thanks to our many years of experience, we can usually send you the correct tooth configuration directly with the above information.
You can also provide us with vehicle information in the comments field when purchasing or, ideally, disassemble your instrument in advance and count the number of teeth.

Service:
We have over 100 gear variants in our range and can supply the right gears if required!

+ all alternative sizes always in stock
+ fast exchange service in the event of a size discrepancy

For the repair, we will send you illustrated repair instructions (German/English) by email.

Quality:
Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the pairs of gears.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.

If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grab the speedometer needle in the middle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft.

partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.

Reference numbers:
VDONr439201/003/001


Scope of delivery:
see illustration

Suitable for:
VDO SUMLOG display up to 8 knots
Gear ratio Z=786

Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/