Double ignition distributor BOSCH for PORSCHE 964 993 in exchange

Double ignition distributor BOSCH for PORSCHE 964 993 in exchange

Also available with a surface finish!

Description:
A damaged or worn double ignition distributor can quickly have the fatal consequences of engine damage.

The first risk lies in the old belt installed, which drives the secondary ignition circuit. This belt is exposed to heat, moisture and possibly worn bearings and ozone over the years, so this wear and aging can cause it to crack.
In this situation, the secondary circuit, which is no longer driven, fires every 6 times on one cylinder, causing severe overheating damage to the affected and adjacent cylinders and cylinder heads.

Another risk that can lead to damage to the engine due to the double ignition distributor lies in the bearing of the main shaft. In contrast to the generously sized main bearings, the axial and especially the pressure bearing is a sensitive point. Axial bearings/thrust bearings that are not pressed in correctly lead to the shaft running in, which consequently results in fine hard metal abrasion. Since this bearing of the main shaft is lubricated by engine oil, chips and abrasion enter the oil circuit.
Such damage can even be seen with new double ignition distributors if the axial and thrust bearings (one unit) are minimally misaligned.
In the case of double ignition distributors where only the belt or bearing has already been replaced, the rate of this damage is even higher, as the main shaft is often not corrected and abrasion occurs after just a few thousand km. 

As part of the professional overhaul of the original BOSCH double ignition distributor The following work is carried out:

+ Cleaning of the housing inside and outside using mechanical ultrasonic cleaning

+ Replacing the drive belt with an original Continental belt 

+ Main shaft correction depending on the running/damage pattern by nitriding/hardening/grinding/straightening + correction of the bearing seats in the event of misalignment or damage

+ Cleaning and greasing of all moving parts with special grease + Surface treatment in case of damage

+ Assembly and measurement of all components using a measuring device for length, play, preload, pressure

+ Compress drive pinion

+ Functional and quality testing of the mechanics as well as testing the Hall sensor for signal quality

The professional execution of all work is ensured by a specialist company with many years of experience that specializes in 964 and 993!

+ Original Porsche spare part for the value-appropriate restoration of your classic car

+ Fast delivery thanks to deposit service and daily shipping


It is recommended to use the sealing ring Item#12110 to be changed at the same time for installation on the housing!

The Bosch company was founded in Stuttgart in 1886 and has always been involved in the production of car parts, which has made the company the world's largest automotive supplier. Bosch mainly produces electronic components and their controllers and switches. The company has gained a worldwide reputation through developments in the area of technical systems such as the ABS system, traction control (ASR) and the Electronic Stability Program (ESP). In addition, Bosch components are very durable and have excellent workmanship.

Process for the exchange procedure:
A core deposit is charged on your old component.
This amount is automatically added to your shopping cart and billed.
After receiving and inspecting your old components, we will refund the deposit amount automatically.

Please understand that we can only accept original and undamaged parts (only normal wear and tear). Please send us the core in the same condition as the reconditioned part (screws, applications, etc.). Cores with atypical damage cannot be reconditioned and will need to be returned to you. This is the only way we can maintain the exchange process.

Further information on the exchange process, unacceptable damages, and core deposit can be found here: https://partworks.de/partworks/en/submenu/service/deposit/

Shipping outside the EU countries is not possible.

Reference numbers:
930602015AX,   930.602.015.AX,   930 602 015 AX
930602015
93060201500,   930.602.015.00,   930 602 015 00
93060201501,   930.602.015.01,   930 602 015 01


Scope of delivery:
According to illustration

Suitable for:
964 Carrera (no turbo)
993 Carrera (no turbo)

Deposit amount:
600 €

Product Safety Information:
Manufacturer:
Robert Bosch GmbH
Auf der Breit 4
76227 Karlsruhe - DE
Email: kontakt@bosch.de
Website: https://www.bosch.com/