Article successfully added.
1,504.22€*
1,566.90€*
Prices incl. VAT plus shipping costs
Available immediately
This item will be shipped today if you order within 14 hours and 14 minutes!
- Order number: 15120
- Manufacturer: partworks
Camshafts for PORSCHE 911 G 3.0 SC 3.2 Carrera inlet + outlet OE quality Description:... more
Camshafts for PORSCHE 911 G 3.0 SC 3.2 Carrera inlet + outlet
OE quality
Description:
If, during an engine overhaul, it turns out that the running surfaces of the camshaft are damaged, replacing the entire camshaft is often the simplest solution.
Here you can get high-quality reproduced camshafts.
The camshafts are made of CrMo-alloyed tempered steel with a strength of 900-1200 N/mm2.
You can find many other parts for engine overhaul in our shop.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
Attention, the vehicle manufacturer has changed the scope of delivery of this item over time when updating the OE numbers. Therefore, an older OE number may contain more components than its current OE number. For example, the door hinge used to be delivered directly with a bolt and cotter pin and today all three components have their own OE number. We have listed old and new OE numbers of this product here for comparison purposes. If you have any doubts about the scope of delivery, simply check our product images.
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.
99310516350, 993.105.163.50, 993 105 163 50
3010514810
3010514710
93010516300, 930.105.163.00, 930 105 163 00
93010514708, 930.105.147.08, 930 105 147 08
93010514808, 930.105.148.08, 930 105 148 08
93010514717, 930.105.147.17, 930 105 147 17
93010514716, 930.105.147.16, 930 105 147 16
93010514710, 930.105.147.10, 930 105 147 10
90008207201, 900.082.072.01, 900 082 072 01
93010514817, 930.105.148.17, 930 105 148 17
93010514816, 930.105.148.16, 930 105 148 16
93010514810, 930.105.148.10, 930 105 148 10
N0101422
90008200802, 900.082.008.02, 900 082 008 02
90008304302, 900.083.043.02, 900 083 043 02
N0101427
N0101426
Scope of delivery:
According to illustration
Suitable for:
911 G 3.0 SC / 3.2 Carrera
OE quality
Description:
If, during an engine overhaul, it turns out that the running surfaces of the camshaft are damaged, replacing the entire camshaft is often the simplest solution.
Here you can get high-quality reproduced camshafts.
The camshafts are made of CrMo-alloyed tempered steel with a strength of 900-1200 N/mm2.
You can find many other parts for engine overhaul in our shop.
partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.
Reference numbers:
Attention, the vehicle manufacturer has changed the scope of delivery of this item over time when updating the OE numbers. Therefore, an older OE number may contain more components than its current OE number. For example, the door hinge used to be delivered directly with a bolt and cotter pin and today all three components have their own OE number. We have listed old and new OE numbers of this product here for comparison purposes. If you have any doubts about the scope of delivery, simply check our product images.
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.
99310516350, 993.105.163.50, 993 105 163 50
3010514810
3010514710
93010516300, 930.105.163.00, 930 105 163 00
93010514708, 930.105.147.08, 930 105 147 08
93010514808, 930.105.148.08, 930 105 148 08
93010514717, 930.105.147.17, 930 105 147 17
93010514716, 930.105.147.16, 930 105 147 16
93010514710, 930.105.147.10, 930 105 147 10
90008207201, 900.082.072.01, 900 082 072 01
93010514817, 930.105.148.17, 930 105 148 17
93010514816, 930.105.148.16, 930 105 148 16
93010514810, 930.105.148.10, 930 105 148 10
N0101422
90008200802, 900.082.008.02, 900 082 008 02
90008304302, 900.083.043.02, 900 083 043 02
N0101427
N0101426
Scope of delivery:
According to illustration
Suitable for:
911 G 3.0 SC / 3.2 Carrera
Related links to "Camshafts for PORSCHE 911 G 3.0 SC 3.2 Carrera inlet + outlet"
Brand | Model | Type | Platform | Year of manufacture | Motor | Restrictions |
Porsche | 911 | 3.2 Carrera | 911 G | 1984/02-1987/06 | 3164 ccm, 152 KW, 207 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1975/09-1977/06 | 2993 ccm, 147 KW, 200 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1980/08-1983/07 | 2993 ccm, 150 KW, 204 PS | |
Porsche | 911 | 3.2 | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1977/07-1980/06 | 2993 ccm, 132 KW, 180 PS | |
Porsche | 911 | 3.2 Carrera | 911 G | 1983/08-1989/08 | 3164 ccm, 170 KW, 231 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1979/09-1980/06 | 2993 ccm, 138 KW, 188 PS | |
Porsche | 911 | 3.0 SC | 911 G | 1974/03-1983/10 | 2993 ccm, 154 KW, 209 PS | |
Porsche | 911 | 3.0 Turbo | 930 Turbo | 1975/09-1977/12 | 2993 ccm, 174 KW, 237 PS | |
Porsche | 911 Targa | 3.0 SC | 911 G | 1979/09-1980/06 | 2993 ccm, 138 KW, 188 PS | |
Porsche | 911 Targa | 3.0 SC | 911 G | 1975/09-1977/06 | 2993 ccm, 147 KW, 200 PS | |
Porsche | 911 Targa | 3.0 SC | 911 G | 1977/07-1980/06 | 2993 ccm, 132 KW, 180 PS | |
Porsche | 911 Targa | 3.2 Carrera | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | |
Porsche | 911 Targa | 3.2 Carrera | 911 G | 1984/01-1987/12 | 3164 ccm, 152 KW, 207 PS | |
Porsche | 911 Cabriolet | 3.2 Carrera | 911 G | 1984/10-1989/08 | 3164 ccm, 152 KW, 207 PS | |
Porsche | 911 Cabriolet | 3.0 SC | 911 G | 1982/08-1983/07 | 2993 ccm, 150 KW, 204 PS | |
Porsche | 911 Cabriolet | 3.2 Carrera Speedster | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | |
Porsche | 911 Cabriolet | 3.2 Carrera | 911 G | 1983/08-1984/08 | 3164 ccm, 170 KW, 231 PS | |
Porsche | 911 Cabriolet | 3.2 Carrera Speedster | 911 G | 1986/08-1989/08 | 3164 ccm, 170 KW, 231 PS |
Read, write and discuss reviews... more
Customer evaluation for "Camshafts for PORSCHE 911 G 3.0 SC 3.2 Carrera inlet + outlet"
Write an evaluation
Evaluations will be activated after verification.
Viewed