2x shock absorber strut PORSCHE 944 '87-'89 with Bilstein cartridge in the AT FRONT

2x shock absorber strut PORSCHE 944 '87-'89 with Bilstein cartridge in the AT FRONT

Struts converted to Bilstein B6 shock absorbers

Description:
The switch to pressed shock absorbers in the 944 from '87 onwards results in some problems when replacing them. Replacing the entire axle leg is costly. In addition, availability on the market is very limited. We therefore offer you an ideal solution that is also future-oriented.

In exchange you will receive a set of front axle legs with shock absorbers, which has been converted to bolted dampers. These have been revised as follows:
- Opening and removing the defective damper
- Precise shortening of the shock absorber
- Inserting and welding the threaded sleeve
- Galvanizing and powdering

As a result, the Bilstein B6 shock absorbers can be used and screwed together using a union nut. The set also includes the matching cartridge key. The dampers are characterized by improved coordination and high-quality workmanship. Thanks to the screw connection, subsequent renovations or a switch to sporty dampers like in the 968 are also easily possible.

Please note the different suspension strut variants that were used throughout the 944 series. This is the Fichtel and Sachs version with a large spring plate without a mount for an air baffle, which was used in the 944/944S from '87-'89 with the introduction of the wide axle.

Process:
We charge a deposit on your old pressed shock absorbers.
Please transfer the deposit amount directly via the Paypal website after purchase.
If you pay by bank transfer, please send us your account details for the return transfer by email.
After receiving your old parts, we will automatically refund the deposit.
Please understand that we cannot accept parts with serious damage such as a break or similar. Additionally, we do not accept designs from Koni or other non-original parts. Please check these criteria in advance!

International Customers, please be aware that this is an auction "in exchange" for your old, worn parts. Only available for EU countries. Please read the description carefully before the purchase and feel free to contact us for any further questions.

This product is a set of branded goods from renowned automotive suppliers created by partworks. If we identify the manufacturer of the components, for example through cardboard packaging, it will also be a set component from this manufacturer. Please do not forget that even the largest suppliers sometimes trade goods with each other. In any case, you can always rely on the high quality standards of our components.

Process for the exchange procedure:
A core deposit is charged on your old component.
This amount is automatically added to your shopping cart and billed.
After receiving and inspecting your old components, we will refund the deposit amount automatically.

Please understand that we can only accept original and undamaged parts (only normal wear and tear). Please send us the core in the same condition as the reconditioned part (screws, applications, etc.). Cores with atypical damage cannot be reconditioned and will need to be returned to you. This is the only way we can maintain the exchange process.
The old part must be returned within one year, otherwise there is no entitlement to a refund.

Further information on the exchange process, unacceptable damages, and core deposit can be found here: https://partworks.de/partworks/en/submenu/service/deposit/

Shipping outside the EU countries is not possible.

Reference numbers:
94434303117,   944.343.031.17,   944 343 031 17
94434303217,   944.343.032.17,   944 343 032 17
477412059A


Scope of delivery:
According to illustration

Suitable for:
944/944S '87-'89

Deposit amount:
600 €

Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/