Porsche 911 G model spare parts

Technical data

The G series of the Porsche 911 was produced from 1973 to 1989, each model year was internally designated by a successive letter, so strictly speaking only the 1974 model year can be called a G model, however, G model has long been considered a nickname for the second generation 911.

These models differ fundamentally in the body to the Porsche Urmodell. Characteristic of the G-model is the larger bumper and front turn signals on the bumper, which were positioned on the fender of the earlier model. New legislation in the U.S., which required bumpers and hydraulic impact absorbers to be positioned higher for a damage-free impact at 8 km/h, led to significant differences between the U.S. model and European cars. On models not intended for U.S. export, the impact absorbers were replaced with less expensive impact tubes. Due to the wrinkle-like plastic transitions between the bumper and body, the G model was also referred to as the "Bellows Porsche".

Engine and prices

Compared to Porsche Ur models, the interior remained almost unchanged. Only the more comfortable seats, which were also available with heated seats, as well as an electric sunroof and power windows made the difference there. In 1975, the new 911 Turbo was available, which, thanks to its 3-liter turbocharged engine, was the fastest German production car of its time, with a top speed of 250 km/h (155 mph). Three years later, the car was equipped with a 3.3-liter engine and intercooler, which took the 911 Turbo to 260 km/h.

Until 1982, the Neunelfer was initially available only as a Targa and Coupé due to the legislature in the United States. The subsequent Porsche 911 SC Cabriolet was built a total of 4277 times, of which over 40% were sold in the USA. The successor models of the Porsche 911 G series were the 964 and 993 models. The price trend for the 911 G is increasing, which is why a purchase recommendation is currently suggested.

Porsche 911 G spare parts

We at partworks.de also offer a wide range of spare parts for the Porsche 911 G for all assemblies, which are available in our store. Our range of spare parts can also be found on eBay and eBay classifieds. You will find a wide range of Porsche 911 G spare parts in OEM quality for engine, drivetrain, chassis, lighting and electronics, body, exhaust system such as muffler, and much more.

« show less
Porsche 911 G model spare parts Technical data The G series of the Porsche 911 was produced from 1973 to 1989, each model year was internally designated by a successive letter, so strictly... read more »
Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
101 From 101
No results were found for the filter!
Oil seal gearbox for PORSCHE 911 G 964 993 G50 G64 99911340440
  • 2945
  • Elring
13.90€* 19.90€*

Prices incl. VAT plus shipping costs

Out of stock

1x door window frame stop for PORSCHE 911 F/G Coupe '69-'77 rubber buffer
  • 11636
  • partworks
13.90€* 19.90€*

Prices incl. VAT plus shipping costs

Out of stock

1x adjusting screw axle swords for PORSCHE 911 F G SC eccentric rear axle
  • 9552
  • partworks
12.98€* 18.98€*

Prices incl. VAT plus shipping costs

Out of stock

1x Bolt flywheel for PORSCHE 911 2.2 2.4 2.7 930 3.0 Turbo
  • 920
  • partworks
12.98€* 18.98€*

Prices incl. VAT plus shipping costs

Out of stock

Windshield wiper blade for PORSCHE 911 G from '76- 930 Turbo REAR
  • 7937
  • Valeo - SWF
12.90€* 18.90€*

Prices incl. VAT plus shipping costs

Out of stock

1x rubber bearing wishbone for PORSCHE 911 F G SC 930 bushing A-link
  • 9655
  • Markenlos
11.98€* 17.98€*

Prices incl. VAT plus shipping costs

Out of stock

Oil drain plug for PORSCHE 911 F G SC 928 oil strainer cover oil tank
  • 8568
  • Corteco
11.72€* 17.72€*

Prices incl. VAT plus shipping costs

Out of stock

2x piping fender for PORSCHE 911 F G 930 Turbo seal FRONT
  • 4051
  • partworks
10.93€* 16.93€*

Prices incl. VAT plus shipping costs

Out of stock

Gasket fuel gauge clock for PORSCHE 911 F G rubber ring speedometer 80mm
  • 5534
  • partworks

  • Durchmesser: 80mm
10.90€* 16.90€*

Prices incl. VAT plus shipping costs

Out of stock

1x stabilizer bearing 18mm for PORSCHE 911 3.0 930 964 993 944 968 rubber REAR
  • 9656
  • partworks

  • Innendurchmesser: 18mm
9.98€* 15.98€*

Prices incl. VAT plus shipping costs

Out of stock

1x sealing ring wiper linkage for PORSCHE 911 G SC 964 944 928 rubber ring
  • 9073
  • partworks
9.98€* 15.98€*

Prices incl. VAT plus shipping costs

Out of stock

1x connecting rod bushing for PORSCHE 911 3.2 Carrera 930 3.3 Turbo 964
  • 922
  • Federal Mogul - Glyco
8.98€* 14.98€*

Prices incl. VAT plus shipping costs

Out of stock

Engine cover for PORSCHE 911 F/G '65-'83 Cover plate without hole REAR
  • 13166
  • JP - Dansk

  • JP: 1682601600
163.10€* 169.90€*

Prices incl. VAT plus shipping costs

Out of stock

Seal door shaft for PORSCHE 911 F G SC 930 964 velor RIGHT
  • 7819
  • partworks
49.55€* 55.55€*

Prices incl. VAT plus shipping costs

Out of stock

Brake caliper for PORSCHE 911 G 3.2 Carrera FRONT LEFT FTE
  • 5566
  • Valeo - FTE

  • Brake disc type: ventilated
  • Piston diameter: 48.0 mm
  • Brake caliper design: fixed caliper (2-piston)
  • Piston diameter: 48 mm
  • Brake disc passage: 28 mm
  • Hole spacing: 89mm
  • Brake pad mounting width: 77 mm
  • Piston outer diameter: 42 mm
  • Piston inner diameter: 33 mm
  • Brake piston distance: 60 mm
332.06€* 345.90€*

Prices incl. VAT plus shipping costs

Out of stock

1x seal heating hose for PORSCHE 911 F G SC '69-'89 rubber seal
  • 9543
  • partworks
9.98€* 15.98€*

Prices incl. VAT plus shipping costs

Out of stock

101 From 101
Dispatch until 5:30 PM Telephoneservice ISO 9001 certified High customer satisfaction