Article successfully added.
1,437.02€*
1,496.90€*
Prices incl. VAT plus shipping costs
Available immediately
This item will be shipped today if you order within 16 hours and 10 minutes!
- Order number: 1987
- Manufacturer: ThyssenKrupp - Bilstein
Shock absorber strut for PORSCHE 911 F G BILSTEIN B6 series FRONT L+R Pair of shock absorber... more
Shock absorber strut for PORSCHE 911 F G BILSTEIN B6 series FRONT L+R
Pair of shock absorber struts L+R
Description:
If your vehicle vibrates several times while driving on uneven roads or when pushed down while stationary, the shock absorbers may be defective and should be replaced. Creaking and squeaking noises are also an indication of this. Here you will receive a pair of high-quality replacements from the Bilstein brand. In addition to the original B4 replacement, you can usually also find sportier, stiffer B6 and shortened B8 variants in our shop.
These shock absorber legs are suitable for the specified models. The Turbo series damper marking describes the parameter 140/100. This consists of the rebound and compression stages of the damper. If you are looking for stiffer (sportier) or softer shock absorbers, you will find many other parameters in our shop.
Notes:
Three different front axle damper struts were installed as standard in the F and G models from '72-'89.
Bilstein Axle Bone (Green):
Depending on requirements, the parton insert can be exchanged. You can find these under the item numbers 3904 (set 1944), 3927 (set 1961), 3935 (set 1966), 3928 (set 1962) and 3551 (set 1924).
Boge/Sachs-Achsbein (Black):
The shock absorbers are bolted and can be replaced with a Bilstein damper. Here too we offer you a selection of different parameters under the item numbers 3926 (Set 1960), 3902 (Set 1942) and 3903 (Set 1943).
G models from 07/85 have an axle strut with an external thread, which is why the shock absorber 3946 (set 1975) (set 1975) with an internal thread of the union nut is suitable for this case.
The cartridge key 1989 with an inner diameter of 55mm is required for installation.
Koni axle leg (red):
Can be exchanged for a Bilstein axle leg. We also offer axle legs in two configurations under the numbers 3929/3930 (set 1987) and 3905/3906 (set 1984).
This set can be supplemented with the 1957 set to form a complete front and rear axle set depending on the version.
August Bilstein founded the AUBI company in Ennepetal as early as 1873 and began developing and supplying monotube gas pressure dampers in 1954 - a significant contribution to the history of the automotive industry. From 1961 onwards, the company entered racing and particularly equipped Porsche and Formula 1 racing cars. Since then, Bilstein has stood for excellent quality and offers various solution concepts for many premium manufacturers. After the takeover of Krupp Stahl AG in 1991 and the merger with Thyssen in 1997, the company name ThyssenKrupp Bilstein GmbH was created.
Additional Information:
● Functional principle: 1-pipe upside down
Reference numbers:
Attention, the vehicle manufacturer has changed the scope of delivery of this item over time when updating the OE numbers. Therefore, an older OE number may contain more components than its current OE number. For example, the door hinge used to be delivered directly with a bolt and cotter pin and today all three components have their own OE number. We have listed old and new OE numbers of this product here for comparison purposes. If you have any doubts about the scope of delivery, simply check our product images.
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.
91134104133, 911.341.041.33, 911 341 041 33
91134104132, 911.341.041.32, 911 341 041 32
91134194500, 911.341.945.00, 911 341 945 00
91134104130, 911.341.041.30, 911 341 041 30
91134107933, 911.341.079.33, 911 341 079 33
91134107936, 911.341.079.36, 911 341 079 36
91134107940, 911.341.079.40, 911 341 079 40
91134107948, 911.341.079.48, 911 341 079 48
91134104204, 911.341.042.04, 911 341 042 04
91134104233, 911.341.042.33, 911 341 042 33
91134104232, 911.341.042.32, 911 341 042 32
91134194600, 911.341.946.00, 911 341 946 00
91134108048, 911.341.080.48, 911 341 080 48
91134108040, 911.341.080.40, 911 341 080 40
91134108036, 911.341.080.36, 911 341 080 36
91134104230, 911.341.042.30, 911 341 042 30
91134108033, 911.341.080.33, 911 341 080 33
91134104104, 911.341.041.04, 911 341 041 04
91134104411, 911.341.044.11, 911 341 044 11
91134191313, 911.341.913.13, 911 341 913 13
91134104311, 911.341.043.11, 911 341 043 11
91134191306, 911.341.913.06, 911 341 913 06
Scope of delivery:
According to illustration
Suitable for:
911 year '72-'89
90mm hole spacing brake caliper (S/A brake)
Pair of shock absorber struts L+R
Description:
If your vehicle vibrates several times while driving on uneven roads or when pushed down while stationary, the shock absorbers may be defective and should be replaced. Creaking and squeaking noises are also an indication of this. Here you will receive a pair of high-quality replacements from the Bilstein brand. In addition to the original B4 replacement, you can usually also find sportier, stiffer B6 and shortened B8 variants in our shop.
These shock absorber legs are suitable for the specified models. The Turbo series damper marking describes the parameter 140/100. This consists of the rebound and compression stages of the damper. If you are looking for stiffer (sportier) or softer shock absorbers, you will find many other parameters in our shop.
Notes:
Three different front axle damper struts were installed as standard in the F and G models from '72-'89.
Bilstein Axle Bone (Green):
Depending on requirements, the parton insert can be exchanged. You can find these under the item numbers 3904 (set 1944), 3927 (set 1961), 3935 (set 1966), 3928 (set 1962) and 3551 (set 1924).
Boge/Sachs-Achsbein (Black):
The shock absorbers are bolted and can be replaced with a Bilstein damper. Here too we offer you a selection of different parameters under the item numbers 3926 (Set 1960), 3902 (Set 1942) and 3903 (Set 1943).
G models from 07/85 have an axle strut with an external thread, which is why the shock absorber 3946 (set 1975) (set 1975) with an internal thread of the union nut is suitable for this case.
The cartridge key 1989 with an inner diameter of 55mm is required for installation.
Koni axle leg (red):
Can be exchanged for a Bilstein axle leg. We also offer axle legs in two configurations under the numbers 3929/3930 (set 1987) and 3905/3906 (set 1984).
This set can be supplemented with the 1957 set to form a complete front and rear axle set depending on the version.
August Bilstein founded the AUBI company in Ennepetal as early as 1873 and began developing and supplying monotube gas pressure dampers in 1954 - a significant contribution to the history of the automotive industry. From 1961 onwards, the company entered racing and particularly equipped Porsche and Formula 1 racing cars. Since then, Bilstein has stood for excellent quality and offers various solution concepts for many premium manufacturers. After the takeover of Krupp Stahl AG in 1991 and the merger with Thyssen in 1997, the company name ThyssenKrupp Bilstein GmbH was created.
Additional Information:
● Functional principle: 1-pipe upside down
Reference numbers:
Attention, the vehicle manufacturer has changed the scope of delivery of this item over time when updating the OE numbers. Therefore, an older OE number may contain more components than its current OE number. For example, the door hinge used to be delivered directly with a bolt and cotter pin and today all three components have their own OE number. We have listed old and new OE numbers of this product here for comparison purposes. If you have any doubts about the scope of delivery, simply check our product images.
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.
91134104133, 911.341.041.33, 911 341 041 33
91134104132, 911.341.041.32, 911 341 041 32
91134194500, 911.341.945.00, 911 341 945 00
91134104130, 911.341.041.30, 911 341 041 30
91134107933, 911.341.079.33, 911 341 079 33
91134107936, 911.341.079.36, 911 341 079 36
91134107940, 911.341.079.40, 911 341 079 40
91134107948, 911.341.079.48, 911 341 079 48
91134104204, 911.341.042.04, 911 341 042 04
91134104233, 911.341.042.33, 911 341 042 33
91134104232, 911.341.042.32, 911 341 042 32
91134194600, 911.341.946.00, 911 341 946 00
91134108048, 911.341.080.48, 911 341 080 48
91134108040, 911.341.080.40, 911 341 080 40
91134108036, 911.341.080.36, 911 341 080 36
91134104230, 911.341.042.30, 911 341 042 30
91134108033, 911.341.080.33, 911 341 080 33
91134104104, 911.341.041.04, 911 341 041 04
91134104411, 911.341.044.11, 911 341 044 11
91134191313, 911.341.913.13, 911 341 913 13
91134104311, 911.341.043.11, 911 341 043 11
91134191306, 911.341.913.06, 911 341 913 06
Scope of delivery:
According to illustration
Suitable for:
911 year '72-'89
90mm hole spacing brake caliper (S/A brake)
Related links to "Shock absorber strut for PORSCHE 911 F G BILSTEIN B6 series FRONT L+R"
Brand | Model | Type | Platform | Year of manufacture | Motor | Restrictions |
Porsche | 911 | 2.3 T | 911 F | 1972/01-1973/12 | 2341 ccm, 96 KW, 130 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 2.3 T | 911 F | 1971/08-1973/12 | 2341 ccm, 103 KW, 140 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 2.3 S | 911 F | 1971/08-1973/08 | 2341 ccm, 140 KW, 190 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 2.7 S Carrera | 911 F | 1973/08-1976/01 | 2687 ccm, 129 KW, 175 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 2.3 E | 911 F | 1971/08-1973/12 | 2341 ccm, 121 KW, 165 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 2.7 SC Carrera RS | 911 F | 1972/08-1979/01 | 2687 ccm, 154 KW, 209 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.0 SC | 911 G | 1979/09-1980/06 | 2993 ccm, 138 KW, 188 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 2.7 | 911 G | 1975/09-1977/06 | 2687 ccm, 121 KW, 165 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.2 Carrera | 911 G | 1983/08-1989/08 | 3164 ccm, 170 KW, 231 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.0 SC | 911 G | 1975/09-1977/06 | 2993 ccm, 147 KW, 200 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.2 Carrera | 911 G | 1984/02-1987/06 | 3164 ccm, 152 KW, 207 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.0 SC | 911 G | 1974/03-1983/10 | 2993 ccm, 154 KW, 209 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.2 | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.0 SC | 911 G | 1980/08-1983/07 | 2993 ccm, 150 KW, 204 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.0 SC | 911 G | 1977/07-1980/06 | 2993 ccm, 132 KW, 180 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 2.7 | 911 G | 1973/09-1975/08 | 2687 ccm, 110 KW, 150 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.3 Turbo | 930 Turbo | 1986/06-1989/08 | 3299 ccm, 221 KW, 300 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.0 Turbo | 930 Turbo | 1975/01-1977/12 | 2993 ccm, 191 KW, 260 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.3 Turbo | 930 Turbo | 1986/09-1990/11 | 3299 ccm, 243 KW, 330 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 | 3.3 Turbo | 930 Turbo | 1977/09-1987/06 | 3299 ccm, 221 KW, 301 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.3 T | 911 F | 1972/01-1973/12 | 2341 ccm, 96 KW, 130 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.3 T | 911 F | 1971/09-1973/12 | 2341 ccm, 103 KW, 140 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.3 S | 911 F | 1971/09-1973/08 | 2341 ccm, 140 KW, 190 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.7 SC Carrera RS | 911 F | 1972/08-1979/01 | 2687 ccm, 154 KW, 209 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.3 E | 911 F | 1971/08-1973/12 | 2341 ccm, 121 KW, 165 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.7 | 911 G | 1975/09-1977/06 | 2687 ccm, 121 KW, 165 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 3.2 Carrera | 911 G | 1984/01-1987/12 | 3164 ccm, 152 KW, 207 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 3.2 Carrera | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 3.0 SC | 911 G | 1977/07-1980/06 | 2993 ccm, 132 KW, 180 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.7 S | 911 G | 1973/08-1976/01 | 2687 ccm, 129 KW, 175 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 3.0 SC | 911 G | 1979/09-1980/06 | 2993 ccm, 138 KW, 188 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 2.7 | 911 G | 1973/09-1975/08 | 2687 ccm, 110 KW, 150 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 3.0 SC | 911 G | 1975/09-1977/06 | 2993 ccm, 147 KW, 200 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Targa | 3.3 Turbo | 930 Turbo | 1986/09-1990/11 | 3299 ccm, 221 KW, 301 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Cabriolet | 3.2 Carrera | 911 G | 1984/10-1989/08 | 3164 ccm, 152 KW, 207 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Cabriolet | 3.2 Carrera | 911 G | 1983/08-1984/08 | 3164 ccm, 170 KW, 231 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Cabriolet | 3.2 Carrera Speedster | 911 G | 1986/08-1989/08 | 3164 ccm, 160 KW, 218 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Cabriolet | 3.2 Carrera Speedster | 911 G | 1986/08-1989/08 | 3164 ccm, 170 KW, 231 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Cabriolet | 3.0 SC | 911 G | 1982/08-1983/07 | 2993 ccm, 150 KW, 204 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Porsche | 911 Cabriolet | 3.3 Turbo | 930 Turbo | 1986/09-1989/08 | 3299 ccm, 221 KW, 301 PS | Fahrwerk: für Fahrzeuge mit Standard Fahrwerk, Federbeinhersteller: Bilstein |
Read, write and discuss reviews... more
Customer evaluation for "Shock absorber strut for PORSCHE 911 F G BILSTEIN B6 series FRONT L+R"
Write an evaluation
Evaluations will be activated after verification.
Viewed