Article successfully added.

Rubber bearing axle control arm for PORSCHE 924S 944 from '86- 968 rear axle INNER SET

277.13€* 288.68€*

Prices incl. VAT plus shipping costs

Available immediately

This item will be shipped today if you order within 12 hours and 12 minutes!

  • 8014
  • partworks
Rubber bearing axle control arm for PORSCHE 924S 944 from '86- 968 rear axle INNER SET Made... more
Rubber bearing axle control arm for PORSCHE 924S 944 from '86- 968 rear axle INNER SET

Made in EU

Description:
As an important connection for the rear axle guidance, these rubber-metal bearings should be replaced after more than 20 years of use. The bearing is significantly superior to the plastic bushings on the market thanks to its true-to-original construction using natural rubber. With a hardness of 85 Shore-A and the metal coating, the semi-trailing arm is guided precisely and safely on the rear axle. Even if the use of original rubber bearings is not the cheapest option, these bearing bushes pay off thanks to their long service life. In addition, tearing of the material or unwanted noise is almost impossible.

In addition to these rubber mounts for the inside of the rear axle control arms, you can also get bearing blocks and support bearings for the rear axles of the Porsche 924, 944 and 968 models.

You can find these and other products on our website. If you have any questions, our customer service is available to help you.

partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.

Reference numbers:
Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here:

Attention, the vehicle manufacturer has changed the scope of delivery of this item over time when updating the OE numbers. Therefore, an older OE number may contain more components than its current OE number. For example, the door hinge used to be delivered directly with a bolt and cotter pin and today all three components have their own OE number. We have listed old and new OE numbers of this product here for comparison purposes. If you have any doubts about the scope of delivery, simply check our product images.

Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.

95133102231,   951.331.022.31,   951 331 022 31
95133102101,   951.331.021.01,   951 331 021 01
95133102102,   951.331.021.02,   951 331 021 02
95133102100,   951.331.021.00,   951 331 021 00
95133102201,   951.331.022.01,   951 331 022 01
95133102202,   951.331.022.02,   951 331 022 02
95133102200,   951.331.022.00,   951 331 022 00
95133102131,   951.331.021.31,   951 331 021 31
90007503303,   900.075.033.03,   900 075 033 03
90007503302,   900.075.033.02,   900 075 033 02
94433102201,   944.331.022.01,   944 331 022 01
96433119902,   964.331.199.02,   964 331 199 02
90007413002,   900.074.130.02,   900 074 130 02
90007403802,   900.074.038.02,   900 074 038 02
N0103406
N0102704
95133102132,   951.331.021.32,   951 331 021 32
94433102101,   944.331.021.01,   944 331 021 01
95133102232,   951.331.022.32,   951 331 022 32


Scope of delivery:
see illustration

Suitable for:
924S
944 from '86
968
Related links to "Rubber bearing axle control arm for PORSCHE 924S 944 from '86- 968 rear axle INNER SET"
Brand Model Type Platform Year of manufacture Motor Restrictions
Porsche 924 2.5 S -- 1987/08-1988/07 2479 ccm, 118 KW, 160 PS
Porsche 924 2.5 S -- 1981/10-1984/12 2479 ccm, 120 KW, 163 PS
Porsche 924 2.5 S -- 1985/09-1987/07 2479 ccm, 110 KW, 150 PS
Porsche 944 2.5 S -- 1986/08-1988/07 2479 ccm, 140 KW, 190 PS
Porsche 944 2.5 -- 1987/08-1990/12 2479 ccm, 118 KW, 160 PS
Porsche 944 2.5 Turbo -- 1987/09-1991/07 2479 ccm, 184 KW, 250 PS
Porsche 944 2.5 -- 1985/01-1987/07 2479 ccm, 110 KW, 150 PS ab 06/'86
Porsche 944 2.7 -- 1988/11-1989/08 2681 ccm, 121 KW, 165 PS
Porsche 944 2.5 Turbo -- 1985/08-1988/07 2479 ccm, 162 KW, 220 PS
Porsche 944 3.0 S2 -- 1988/12-1991/07 2990 ccm, 155 KW, 211 PS
Porsche 944 Cabriolet 3.0 S2 -- 1988/12-1991/07 2990 ccm, 155 KW, 211 PS
Porsche 944 Cabriolet 2.5 Turbo -- 1990/11-1991/07 2479 ccm, 184 KW, 250 PS
Porsche 968 3.0 -- 1991/06-1995/11 2990 ccm, 176 KW, 239 PS
Porsche 968 3.0 Turbo S -- 1993/03-1995/11 2990 ccm, 224 KW, 305 PS
Porsche 968 Cabriolet 3.0 -- 1991/06-1995/11 2990 ccm, 176 KW, 239 PS
Read, write and discuss reviews... more
Customer evaluation for "Rubber bearing axle control arm for PORSCHE 924S 944 from '86- 968 rear axle INNER SET"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with* are required.

Dispatch until 5:30 PM Telephoneservice ISO 9001 certified High customer satisfaction