Speedometer gear for VW Beetle 1600 Type 3 odometer

Speedometer gear for VW Beetle 1600 Type 3 odometer

Please note, there are several gear variants, please read the description carefully!

Description:
If the counter of the odometer or operating hours meter on your vehicle has failed, then this drive gear in the instrument is usually the cause. Unsuitable materials can cause the original gears to disintegrate or crack radially. With the help of this offer, any hobby mechanic can easily repair his instrument themselves and save themselves the costly contract repair, waiting times and return shipping costs for the entire instrument.

Gear sets:
Some counter drives contain more than one vulnerable gear. In this case, we strongly recommend that you replace all critical pinions to avoid duplicate installation work: The neighboring gear often fails immediately after the first gear has been replaced. Simply look for the right set in our shop and enter your vehicle as a search term + "gear" (e.g. "Mercedes SL gear").

Note:
The number of teeth on the instrument drives varies even within a model depending on the engine and transmission type, as well as the differential ratio and country code. Thanks to our many years of experience, we can usually send you the correct tooth configuration directly using the above information.
You can also tell us your vehicle information in the comments field when purchasing, or ideally you can disassemble your instrument in advance and count the number of teeth.

Service:
We have over 100 gear variants in our range and can supply the right gears if required!

+ all alternative sizes always in stock
+ fast exchange service in case of size deviations

We will send you illustrated repair instructions (German/English) by email.

Quality:
Our gears are elaborately and faithfully manufactured using an injection molding process; they are not 3D-printed custom designs. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader in its repair solutions.
The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
We use the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.

If you disassemble the speedometer beforehand, please note that the speedometer needle shaft is very sensitive. Grip the speedometer needle in the middle and turn it counterclockwise, pulling gently. Friction is all that keeps the needle on the shaft.

partworks GmbH is a German company specializing in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car enthusiasts worldwide are already satisfied customers of the Paderborn-based company. As a specialist in classic car spare parts, we are aware of our customers' quality standards. Therefore, you can be assured that our follow-up developments are based very closely on the original and, in some cases, even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001-certified quality management system confirms the thoroughness of our work. If you see the manufacturer's designation "partworks," this either indicates an in-house development or an article from the original equipment manufacturer (OE quality). Original equipment manufacturers are those manufacturers who supplied the original product to the vehicle manufacturer but cannot operate under their own brand in the open market.

Reference numbers:
Please note that this product is a subcomponent of the part with the following OE number(s). This means that our article is not listed separately with its own OE number as a spare part by the vehicle manufacturer. For ease of identification and allocation, the OE numbers of the corresponding assembly are listed here:

113957021R
113957023D
113957021C
111957021M
111957021L
113957021K


Scope of delivery:
see illustration

Suitable for:
VW Beetle with speedometer no. 135957021

Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/