Repair set double ignition distributor for PORSCHE 964 993 Carrera

Repair set double ignition distributor for PORSCHE 964 993 Carrera

The right repair kit for your Porsche

Description:
A damaged or worn double ignition distributor can quickly have the fatal consequences of engine damage. The first risk lies in the old belt installed, which drives the secondary ignition circuit. This belt is exposed to heat, moisture and possibly worn bearings and ozone over the years, so this wear and aging can cause it to crack.
In this situation, the secondary circuit, which is no longer driven, fires every 6 ignitions on one cylinder, causing serious overheating damage to the affected and adjacent cylinders and cylinder heads. Another risk that could lead to damage to the engine What can lead to a double ignition distributor is the bearing of the main shaft. In contrast to the generously sized main bearings, the axial and especially the pressure bearing is a sensitive point. Axial bearings/thrust bearings that are not pressed in correctly lead to the shaft running in, which consequently results in fine hard metal abrasion. Since this bearing of the main shaft is lubricated by the engine oil, chips and abrasion get into the oil circuit.
Such damage can even be seen with new double ignition distributors if the axial and thrust bearings (one unit) are minimally misaligned.
In the case of double ignition distributors in which only the belt or bearing has already been replaced, the rate of this damage is even higher, as the main shaft is often not corrected and abrasion occurs after just a few thousand km.

Here you will receive a repair kit for the double ignition distributor.
This set includes:
3x special warehouse
1x axial thrust bearing
3x M4 screw
5x M6 screw
1x notch pin
1x locking ring
1x timing belt
1x secondary lid

In our shop you will also find professionally overhauled ignition distributors in exchange.



partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.

Reference numbers:
Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here:

930602015AX,   930.602.015.AX,   930 602 015 AX
93060201501,   930.602.015.01,   930 602 015 01


Scope of delivery:
According to illustration

Suitable for:
964 (not for Turbo)
993 (not for Turbo)