Vehicle filter
Dispatch until 5:30 pm ISO 9001 certified Dealer prices for workshops and specialist dealers

911 G (74-89)

Porsche 911 G model spare parts

Technical data

The G series of the Porsche 911 was produced from 1973 to 1989, each model year was internally designated by a successive letter, so strictly speaking only the 1974 model year can be called a G model, however, G model has long been considered a nickname for the second generation 911.

These models differ fundamentally in the body to the Porsche Urmodell. Characteristic of the G-model is the larger bumper and front turn signals on the bumper, which were positioned on the fender of the earlier model. New legislation in the U.S., which required bumpers and hydraulic impact absorbers to be positioned higher for a damage-free impact at 8 km/h, led to significant differences between the U.S. model and European cars. On models not intended for U.S. export, the impact absorbers were replaced with less expensive impact tubes. Due to the wrinkle-like plastic transitions between the bumper and body, the G model was also referred to as the "Bellows Porsche".

Engine and prices

Compared to Porsche Ur models, the interior remained almost unchanged. Only the more comfortable seats, which were also available with heated seats, as well as an electric sunroof and power windows made the difference there. In 1975, the new 911 Turbo was available, which, thanks to its 3-liter turbocharged engine, was the fastest German production car of its time, with a top speed of 250 km/h (155 mph). Three years later, the car was equipped with a 3.3-liter engine and intercooler, which took the 911 Turbo to 260 km/h.

Until 1982, the Neunelfer was initially available only as a Targa and Coupé due to the legislature in the United States. The subsequent Porsche 911 SC Cabriolet was built a total of 4277 times, of which over 40% were sold in the USA. The successor models of the Porsche 911 G series were the 964 and 993 models. The price trend for the 911 G is increasing, which is why a purchase recommendation is currently suggested.

Porsche 911 G spare parts

We at partworks.de also offer a wide range of spare parts for the Porsche 911 G for all assemblies, which are available in our store. Our range of spare parts can also be found on eBay and eBay classifieds. You will find a wide range of Porsche 911 G spare parts in OEM quality for engine, drivetrain, chassis, lighting and electronics, body, exhaust system such as muffler, and much more.

« show less
Porsche 911 G model spare parts Technical data The G series of the Porsche 911 was produced from 1973 to 1989, each model year was internally designated by a successive letter, so strictly... read more »
Filter
Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
37 From 101
No results were found for the filter!
2x warning contacts for PORSCHE 911 G 3.2 Carrera FRONT BOSCH
Bosch
2x warning contacts for PORSCHE 911 G 3.2 Carrera FRONT BOSCH
  • Order number: 4837
  • Manufacturer: Bosch
18.90€* 24.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Overflow nozzle tank cuff for PORSCHE 911 F/G '65-'89
partworks
Overflow nozzle tank cuff for PORSCHE 911 F/G '65-'89
  • Order number: 11465
  • Manufacturer: partworks
17.90€* 23.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
10x compensating washer for PORSCHE 911 F G 964 993 adjusting washer camshaft
partworks
10x compensating washer for PORSCHE 911 F G 964 993 adjusting washer camshaft
  • Order number: 7921
  • Manufacturer: partworks
16.60€* 22.60€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
2x adjustment screws brake shoes for PORSCHE 356 911 924 928 944 968 handbrake
partworks
2x adjustment screws brake shoes for PORSCHE 356 911 924 928 944 968 handbrake
  • Order number: 3725
  • Manufacturer: partworks

  • Brake type: parking brake
16.60€* 22.60€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Shaft seal crankshaft for PORSCHE 911 944 924S 968 FRONT
Elring
Shaft seal crankshaft for PORSCHE 911 944 924S 968 FRONT
  • Order number: 5016
  • Manufacturer: Elring
11.90€* 17.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Seal sunroof for PORSCHE 356 911 F G SC 964 993 REAR
partworks
Seal sunroof for PORSCHE 356 911 F G SC 964 993 REAR
  • Order number: 5750
  • Manufacturer: partworks
9.90€* 15.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
2x seal bypass valve for Porsche 911 G 930 964 924 Turbo wastegate seal
partworks
2x seal bypass valve for Porsche 911 G 930 964 924 Turbo wastegate seal
  • Order number: 11873
  • Manufacturer: partworks
9.90€* 15.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x rubber mount radiator for PORSCHE 964 Turbo 993 996 997 Carrera Boxster 986
partworks
1x rubber mount radiator for PORSCHE 964 Turbo 993 996 997 Carrera Boxster 986
  • Order number: 9010
  • Manufacturer: partworks
8.98€* 14.98€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x suppression plug ignition cable for PORSCHE 911 F G from '70- ignition distributor
Beru
1x suppression plug ignition cable for PORSCHE 911 F G from '70- ignition distributor
  • Order number: 15157
  • Manufacturer: Beru
8.90€* 14.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Rubber cuff for PORSCHE 911 G 930 Turbo blower heater cover cap
Rubber cuff for PORSCHE 911 G 930 Turbo blower heater cover cap
  • Order number: 4111
  • Manufacturer: Markenlos
8.66€* 14.66€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x support washer dome bearing for PORSCHE 911 F G SC 912 930 914 FRONT
partworks
1x support washer dome bearing for PORSCHE 911 F G SC 912 930 914 FRONT
  • Order number: 4688
  • Manufacturer: partworks
6.90€* 12.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x stabilizer bearing 16mm for PORSCHE 911 G 2.7 to -'77 rubber bearing FRONT
partworks
1x stabilizer bearing 16mm for PORSCHE 911 G 2.7 to -'77 rubber bearing FRONT
  • Order number: 9405
  • Manufacturer: partworks

  • Inner diameter: 16mm
6.90€* 12.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Protection cap ignition coil for PORSCHE 911 G 2.7 SC 3.0 Turbo
partworks
Protection cap ignition coil for PORSCHE 911 G 2.7 SC 3.0 Turbo
  • Order number: 2372
  • Manufacturer: partworks
5.73€* 11.73€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Rear axle for PORSCHE 911 F/G S SC Carrera '69-'86 axle tube
JP - Dansk
Rear axle for PORSCHE 911 F/G S SC Carrera '69-'86 axle tube
  • Order number: 13084
  • Manufacturer: JP - Dansk

  • JP: 1682001800
1,286.30€* 1,339.90€*

Prices incl. VAT plus shipping costs

Available at short notice

Add to wishlist
24x stud bolts Dilavar bolts for PORSCHE 911 G SC 930 964 993
partworks
24x stud bolts Dilavar bolts for PORSCHE 911 G SC 930 964 993
  • Order number: 3239
  • Manufacturer: partworks
878.15€* 914.74€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
2x brake caliper for PORSCHE 911 F G 930 3.0 turbo S-caliper FRONT L+R JP-Dansk
JP - Dansk
2x brake caliper for PORSCHE 911 F G 930 3.0 turbo S-caliper FRONT L+R JP-Dansk
  • Order number: 15109
  • Manufacturer: JP - Dansk

  • Hole spacing: 90mm
  • Brake piston diameter: 48 mm
  • Brake disc thickness: 20 mm
  • Brake caliper design: fixed caliper (2-piston)
575.90€* 599.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Oil pipe base plate for PORSCHE 911 G SC 930 Turbo up to -'86 Oil pipe return
partworks
Oil pipe base plate for PORSCHE 911 G SC 930 Turbo up to -'86 Oil pipe return
  • Order number: 4322
  • Manufacturer: partworks
383.90€* 399.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
2x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 series FRONT
ThyssenKrupp - Bilstein
2x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 series FRONT
  • Order number: 1961
  • Manufacturer: ThyssenKrupp - Bilstein

  • Functional principle: 1-pipe upside down
  • Parameter: 140/100
382.94€* 398.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x axle bar for PORSCHE 911 G '87-'89 rear axle strut + tools
Prekom
1x axle bar for PORSCHE 911 G '87-'89 rear axle strut + tools
  • Order number: 8033
  • Manufacturer: Prekom
332.61€* 346.47€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x brake caliper for PORSCHE 911 F G 930 3.0 turbo S caliper FRONT RIGHT JP-Dansk
JP - Dansk
1x brake caliper for PORSCHE 911 F G 930 3.0 turbo S caliper FRONT RIGHT JP-Dansk
  • Order number: 15103
  • Manufacturer: JP - Dansk

  • Hole spacing: 90mm
  • Brake piston diameter: 48 mm
  • Brake disc thickness: 20 mm
  • Brake caliper design: fixed caliper (2-piston)
297.50€* 309.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Repair piece fender stand plate for PORSCHE 911 '64-'89 964 FRONT LEFT
JP - Dansk
Repair piece fender stand plate for PORSCHE 911 '64-'89 964 FRONT LEFT
  • Order number: 13213
  • Manufacturer: JP - Dansk

  • JP: 1680350370
211.10€* 219.90€*

Prices incl. VAT plus shipping costs

Ready for dispatch 5 working days

Add to wishlist
Pulse generator speedometer for PORSCHE 911 G 930 up to -'84
partworks
Pulse generator speedometer for PORSCHE 911 G 930 up to -'84
  • Order number: 2397
  • Manufacturer: partworks
151.13€* 157.43€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
6x exhaust valve for PORSCHE 911 3.0 SC 3.2 Carrera
ZF - TRW
6x exhaust valve for PORSCHE 911 3.0 SC 3.2 Carrera
  • Order number: 8679
  • Manufacturer: ZF - TRW

  • Length: 108.4mm
139.41€* 149.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
6x inlet valve for PORSCHE 930 Turbo 3.0 3.3 964 Carrera hardened TRW
ZF - TRW
6x inlet valve for PORSCHE 930 Turbo 3.0 3.3 964 Carrera hardened TRW
  • Order number: 8821
  • Manufacturer: ZF - TRW

  • Länge: 110,1 mm
139.41€* 149.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
37 From 101
Viewed
Dispatch until 5:30 PM Telephoneservice ISO 9001 certified High customer satisfaction