Vehicle filter
Dispatch until 5:30 pm ISO 9001 certified Dealer prices for workshops and specialist dealers

911 G (74-89)

Porsche 911 G model spare parts

Technical data

The G series of the Porsche 911 was produced from 1973 to 1989, each model year was internally designated by a successive letter, so strictly speaking only the 1974 model year can be called a G model, however, G model has long been considered a nickname for the second generation 911.

These models differ fundamentally in the body to the Porsche Urmodell. Characteristic of the G-model is the larger bumper and front turn signals on the bumper, which were positioned on the fender of the earlier model. New legislation in the U.S., which required bumpers and hydraulic impact absorbers to be positioned higher for a damage-free impact at 8 km/h, led to significant differences between the U.S. model and European cars. On models not intended for U.S. export, the impact absorbers were replaced with less expensive impact tubes. Due to the wrinkle-like plastic transitions between the bumper and body, the G model was also referred to as the "Bellows Porsche".

Engine and prices

Compared to Porsche Ur models, the interior remained almost unchanged. Only the more comfortable seats, which were also available with heated seats, as well as an electric sunroof and power windows made the difference there. In 1975, the new 911 Turbo was available, which, thanks to its 3-liter turbocharged engine, was the fastest German production car of its time, with a top speed of 250 km/h (155 mph). Three years later, the car was equipped with a 3.3-liter engine and intercooler, which took the 911 Turbo to 260 km/h.

Until 1982, the Neunelfer was initially available only as a Targa and Coupé due to the legislature in the United States. The subsequent Porsche 911 SC Cabriolet was built a total of 4277 times, of which over 40% were sold in the USA. The successor models of the Porsche 911 G series were the 964 and 993 models. The price trend for the 911 G is increasing, which is why a purchase recommendation is currently suggested.

Porsche 911 G spare parts

We at partworks.de also offer a wide range of spare parts for the Porsche 911 G for all assemblies, which are available in our store. Our range of spare parts can also be found on eBay and eBay classifieds. You will find a wide range of Porsche 911 G spare parts in OEM quality for engine, drivetrain, chassis, lighting and electronics, body, exhaust system such as muffler, and much more.

« show less
Porsche 911 G model spare parts Technical data The G series of the Porsche 911 was produced from 1973 to 1989, each model year was internally designated by a successive letter, so strictly... read more »
Filter
Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
67 From 101
No results were found for the filter!
2x impact pipe front bumper for PORSCHE 911 G 930 Turbo front bumper
partworks
2x impact pipe front bumper for PORSCHE 911 G 930 Turbo front bumper
  • Order number: 11892
  • Manufacturer: partworks
165.98€* 172.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Clutch disc for PORSCHE 911 3.0 Turbo 930
ZF - Sachs
Clutch disc for PORSCHE 911 3.0 Turbo 930
  • Order number: 7870
  • Manufacturer: ZF - Sachs

  • Diameter: 240.0mm
  • Number of teeth: 23
  • Parameter: 240TD
  • Hub profile: 23.3x26.3-23N
160.22€* 166.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Rubber bearing axle strut for PORSCHE 911 F G Carrera 930 PU REAR AXLE SET
SuperPro
Rubber bearing axle strut for PORSCHE 911 F G Carrera 930 PU REAR AXLE SET
  • Order number: 6937
  • Manufacturer: SuperPro
158.69€* 165.30€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Rear fender for PORSCHE 911 G 3.0 SC 3.2 bumper corner LEFT
JP - Dansk
Rear fender for PORSCHE 911 G 3.0 SC 3.2 bumper corner LEFT
  • Order number: 4266
  • Manufacturer: JP - Dansk
139.41€* 149.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Crankshaft bearing for PORSCHE 911 G 2.7 3.0 standard size
Federal Mogul - Glyco
Crankshaft bearing for PORSCHE 911 G 2.7 3.0 standard size
  • Order number: 6610
  • Manufacturer: Federal Mogul - Glyco

  • Dimensions: STD holding cam. li
138.80€* 149.25€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Crankshaft bearing for PORSCHE 911 2.0 2.2 2.4 2.7 standard size
Federal Mogul - Glyco
Crankshaft bearing for PORSCHE 911 2.0 2.2 2.4 2.7 standard size
  • Order number: 6609
  • Manufacturer: Federal Mogul - Glyco

  • Dimensions: STD holding cam. re.
136.89€* 147.19€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Synchronizer ring for PORSCHE 911 Turbo 930 gearbox 1st-2nd gear
partworks
Synchronizer ring for PORSCHE 911 Turbo 930 gearbox 1st-2nd gear
  • Order number: 8979
  • Manufacturer: partworks
136.62€* 146.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Rear fender for PORSCHE 911 G SC 3.2 bumper corner RIGHT with exhaust hole
JP - Dansk
Rear fender for PORSCHE 911 G SC 3.2 bumper corner RIGHT with exhaust hole
  • Order number: 4268
  • Manufacturer: JP - Dansk
135.69€* 145.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Air scoop engine for PORSCHE 911 2.7 SC 3.0 K-Jetronic additional air hose SET
partworks
Air scoop engine for PORSCHE 911 2.7 SC 3.0 K-Jetronic additional air hose SET
  • Order number: 7375
  • Manufacturer: partworks
135.69€* 145.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Heating hose sill for PORSCHE 356 911 F/G 912 914 warm air duct
partworks
Heating hose sill for PORSCHE 356 911 F/G 912 914 warm air duct
  • Order number: 11511
  • Manufacturer: partworks
135.69€* 145.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
2x drive shaft joint set for PORSCHE 911 3.2 Carrera 930 964 993 996
GKN - Spidan - Loebro
2x drive shaft joint set for PORSCHE 911 3.2 Carrera 930 964 993 996
  • Order number: 8428
  • Manufacturer: GKN - Spidan - Loebro

  • Length: 32mm
  • Joint diameter: 108 mm
  • Hole circle Ø: 94 mm
  • Bore Ø: 10.9 mm
  • Number of holes: 6
126.39€* 135.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Synchronizer ring for PORSCHE 911 Turbo 930 gearbox 3rd-4th gear
partworks
Synchronizer ring for PORSCHE 911 Turbo 930 gearbox 3rd-4th gear
  • Order number: 8980
  • Manufacturer: partworks
122.97€* 132.23€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Clutch pedal bearing tube for PORSCHE 911 930 F G 2.0-2.7 SC up to -'77 914
partworks
Clutch pedal bearing tube for PORSCHE 911 930 F G 2.0-2.7 SC up to -'77 914
  • Order number: 3266
  • Manufacturer: partworks
117.11€* 125.93€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Oil hose for PORSCHE 930 Turbo 3.3 oil line oil pump to oil tank
partworks
Oil hose for PORSCHE 930 Turbo 3.3 oil line oil pump to oil tank
  • Order number: 7774
  • Manufacturer: partworks
117.09€* 125.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Guide tube release bearing for PORSCHE 911 G 3.2 Carrera '84-'86 915 clutch
partworks
Guide tube release bearing for PORSCHE 911 G 3.2 Carrera '84-'86 915 clutch
  • Order number: 7972
  • Manufacturer: partworks
112.72€* 121.20€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Headlight cover for PORSCHE 911 F G 964 headlight protection SET CLEAR
partworks
Headlight cover for PORSCHE 911 F G 964 headlight protection SET CLEAR
  • Order number: 15436
  • Manufacturer: partworks
111.51€* 119.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Brake master cylinder for PORSCHE 911 3.0 SC 3.2 '78-'89 JP
JP - Dansk
Brake master cylinder for PORSCHE 911 3.0 SC 3.2 '78-'89 JP
  • Order number: 4256
  • Manufacturer: JP - Dansk
109.65€* 117.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Synchronizer ring for PORSCHE 911 G SC 1st-2nd Gear 915 transmission
partworks
Synchronizer ring for PORSCHE 911 G SC 1st-2nd Gear 915 transmission
  • Order number: 8984
  • Manufacturer: partworks
108.61€* 116.79€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x Bumper horn for PORSCHE 911 G 3.2 Carrera 930 3.3 Bumper REAR LEFT
JP - Dansk
1x Bumper horn for PORSCHE 911 G 3.2 Carrera 930 3.3 Bumper REAR LEFT
  • Order number: 6864
  • Manufacturer: JP - Dansk
107.79€* 115.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
1x bumper horn for PORSCHE 911 G 2.7 3.0 SC 930 3.0 bumper REAR LEFT
JP - Dansk
1x bumper horn for PORSCHE 911 G 2.7 3.0 SC 930 3.0 bumper REAR LEFT
  • Order number: 6858
  • Manufacturer: JP - Dansk
107.79€* 115.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Spark plug wrench ORIGINAL PORSCHE 911 912 914 964 on-board tool
Porsche
Spark plug wrench ORIGINAL PORSCHE 911 912 914 964 on-board tool
  • Order number: 14853
  • Manufacturer: Porsche
103.98€* 120.37€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Interior headliner for PORSCHE 911 F G 964 without sunroof WHITE
partworks
Interior headliner for PORSCHE 911 F G 964 without sunroof WHITE
  • Order number: 4286
  • Manufacturer: partworks
102.47€* 110.18€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Impact protection strip bumper for PORSCHE 911 2.7 SC 3.0 up to -'83 REAR LEFT
partworks
Impact protection strip bumper for PORSCHE 911 2.7 SC 3.0 up to -'83 REAR LEFT
  • Order number: 4471
  • Manufacturer: partworks
102.47€* 110.18€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
Windshield frame windshield for PORSCHE 911 F G SC 930 sheet metal cowl LEFT
JP - Dansk
Windshield frame windshield for PORSCHE 911 F G SC 930 sheet metal cowl LEFT
  • Order number: 6764
  • Manufacturer: JP - Dansk
102.21€* 109.90€*

Prices incl. VAT plus shipping costs

Available immediately

Add to wishlist
67 From 101
Viewed
Dispatch until 5:30 PM Telephoneservice ISO 9001 certified High customer satisfaction