Deutsch
English
Français
Speedometer Gears for MERCEDES SL R107 Instrument Cluster Repair SET
Attention, there are several gear variants, please read the description carefully!
Description:
If the odometer/daily odometer on your vehicle has failed, the gears shown are usually the cause. In most cases, one of the gears breaks and the drive stalls.
We advise commercial customers in particular to replace these three gears immediately.
After replacing one damaged gearwheel, the partner gearwheel often fails a short time later. Replacing all three ensures that the drive will function for a long time.
Note:
We also have a repair gear in the store for older models with a mechanical drive!
Important:
The number of teeth of the smaller sprocket (on the back) of type E3 varies from 12 to 21 teeth depending on the model. It depends on many factors (wheel size, gearbox type, engine type, year of manufacture, etc.). It is not possible to make a definite classification. We therefore ask you to tell us the number of teeth of your E3 gearwheel directly in the comments field when purchasing. Without this information, we will send you the most commonly installed gear type.
Service:
We have over 100 gear wheel variants in our range and can supply the right gear wheels if required!
+ all alternative sizes always in stock
+ Fast exchange service for size deviations
We will send you illustrated repair instructions (German/English) for the repair by email.
Advantages:
+ No hassle with used speedometers, which can also fail at any time
+ low repair costs thanks to "do it yourself" solution
+ you retain the originality of your vehicle and the correct mileage
+ No downtime due to return shipments to repair service providers
Quality:
Our gears are manufactured with great care and true to the original using the injection molding process and are not 3D-printed in-house components. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained, which is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grip the speedometer needle in the center and turn it counterclockwise. Pull gently. Friction is all that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the sale of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans around the world are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. That's why you can be sure that the requirements for new developments are based very closely on the original and sometimes even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO-9001-certified quality management confirms the thoroughness of our work. If you see the manufacturer specification partworks, this means that it is either an in-house development or an article from an original equipment manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active on the open market under their own brand.
Reference numbers:
A1075420057, A10.754.200.57, A10 754 200 57
A1075420801, A10.754.208.01, A10 754 208 01
A1075421257, A10.754.212.57, A10 754 212 57
A1075421701, A10.754.217.01, A10 754 217 01
A1075429010, A10.754.290.10, A10 754 290 10
A0035422316, A00.354.223.16, A00 354 223 16
A0125425306, A01.254.253.06, A01 254 253 06
Scope of delivery:
3 gear wheels
Suitable for:
Mercedes-Benz SL / SLC (type R107) with electronic speedometer signal (=no speedometer cable)
So all models year: '81-'89
for KMH and MPH !
For the older models with mechanical drive we also have a repair gear in the store !
Attention, there are several gear variants, please read the description carefully!
Description:
If the odometer/daily odometer on your vehicle has failed, the gears shown are usually the cause. In most cases, one of the gears breaks and the drive stalls.
We advise commercial customers in particular to replace these three gears immediately.
After replacing one damaged gearwheel, the partner gearwheel often fails a short time later. Replacing all three ensures that the drive will function for a long time.
Note:
We also have a repair gear in the store for older models with a mechanical drive!
Important:
The number of teeth of the smaller sprocket (on the back) of type E3 varies from 12 to 21 teeth depending on the model. It depends on many factors (wheel size, gearbox type, engine type, year of manufacture, etc.). It is not possible to make a definite classification. We therefore ask you to tell us the number of teeth of your E3 gearwheel directly in the comments field when purchasing. Without this information, we will send you the most commonly installed gear type.
Service:
We have over 100 gear wheel variants in our range and can supply the right gear wheels if required!
+ all alternative sizes always in stock
+ Fast exchange service for size deviations
We will send you illustrated repair instructions (German/English) for the repair by email.
Advantages:
+ No hassle with used speedometers, which can also fail at any time
+ low repair costs thanks to "do it yourself" solution
+ you retain the originality of your vehicle and the correct mileage
+ No downtime due to return shipments to repair service providers
Quality:
Our gears are manufactured with great care and true to the original using the injection molding process and are not 3D-printed in-house components. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained, which is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grip the speedometer needle in the center and turn it counterclockwise. Pull gently. Friction is all that keeps the needle on the shaft.
partworks GmbH is a German company that specializes in reverse engineering and the sale of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans around the world are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. That's why you can be sure that the requirements for new developments are based very closely on the original and sometimes even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO-9001-certified quality management confirms the thoroughness of our work. If you see the manufacturer specification partworks, this means that it is either an in-house development or an article from an original equipment manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active on the open market under their own brand.
Reference numbers:
A1075420057, A10.754.200.57, A10 754 200 57
A1075420801, A10.754.208.01, A10 754 208 01
A1075421257, A10.754.212.57, A10 754 212 57
A1075421701, A10.754.217.01, A10 754 217 01
A1075429010, A10.754.290.10, A10 754 290 10
A0035422316, A00.354.223.16, A00 354 223 16
A0125425306, A01.254.253.06, A01 254 253 06
Scope of delivery:
3 gear wheels
Suitable for:
Mercedes-Benz SL / SLC (type R107) with electronic speedometer signal (=no speedometer cable)
So all models year: '81-'89
for KMH and MPH !
For the older models with mechanical drive we also have a repair gear in the store !
Review product
Disclaimer: The reviews are not checked for authenticity before they are published. They can therefore also come from consumers who have not actually purchased/used the rated products.
Speedometer Gears for MERCEDES SL R107 Instrument Cluster Repair SET
No issues, Thanks
1
4
5
No issues, Thanks
Speedometer Gears for MERCEDES SL R107 Instrument Cluster Repair SET
Schönes Teil, vielen Dank!!!
1
5
5
Schönes Teil, vielen Dank!!!