Speedometer gear wheel PORSCHE 944 S2 911 G SC Carrera odometer 20x23

Speedometer gear wheel PORSCHE 944 S2 911 G SC Carrera odometer 20x23

Excellent processing quality

Description:
If the odometer/daily odometer on your vehicle has failed, then this gear is almost always the cause. The original beige-brown gears crumble over the years due to a material defect and must be replaced.

Dimensions:
Total diameter = 17.60mm (20 teeth)
Diameter of smaller gear = 9.65 mm (23 teeth)
Measured from tooth tip to tooth tip

Variants:
Most other 944-II have the 20x21 or the 20X30 installed. Both can be found in the store.
We can say with great certainty, but not with 100% certainty, which model has which gear size installed. Too many influencing factors (engine type/transmission type/transmission/differential type/year/model) play a role here.
However, the following data will reliably help you determine the correct gear:
20x21 (17.60mm/9.00mm) Number of teeth opposite partner gear: 49 teeth 911/928 mph/944
20x22 (17.60mm/9.40mm) Number of teeth opposite mating gear: 48 teeth 911/944 mph
20x23 (17.60mm/9.65mm) Number of teeth opposite mating gear: 47 teeth 944(S2)/911(G)
20x29 (17,60mm/12,05mm) Number of teeth opposite partner gear: 41 teeth some 928 km/h
20x30 (17,60mm/12,55mm) Number of teeth opposite partner gear: 40 teeth 911/944
20x32 (17,60mm/13,40mm) Number of teeth opposite partner gear: 38 teeth 928 km/h

Simply count the teeth of the gear into which this gear meshes and/or use the dimensions as a guide.

Service:
We have over 100 gear wheel variants in our range and can supply the right gear wheels if required!

+ all alternative sizes always in stock
+ Fast exchange service for size deviations

We will send you illustrated repair instructions (German/English) for the repair by email. You can also find suitable repair videos on YouTube.

Advantages:
Although buying a used speedometer initially saves on repairs, there is a risk that the gearwheel will break in the near future. In particular, storage times and cold temperatures cause additional damage to the gears. Due to an incorrect choice of material by VDO, all original gears of this type will break over time!
If you have disassembled the speedometer, we also recommend replacing the bulbs. These lose their performance noticeably over the years.

Quality:
Our gearwheels are elaborately and faithfully manufactured using the injection molding process and are not 3D-printed in-house components. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is retained, which is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.

If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grip the speedometer needle in the center and turn it counterclockwise. Pull gently. Friction is all that keeps the needle on the shaft.

partworks GmbH is a German company that specializes in reverse engineering and the sale of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans around the world are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. That's why you can be sure that the requirements for new developments are based very closely on the original and sometimes even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO-9001-certified quality management confirms the thoroughness of our work. If you see the manufacturer specification partworks, this means that it is either an in-house development or an article from an original equipment manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active on the open market under their own brand.

Reference numbers:
911641516FX,   911.641.516.FX,   911 641 516 FX
92864110331,   928.641.103.31,   928 641 103 31
94464131136,   944.641.311.36,   944 641 311 36
99664131136,   996.641.311.36,   996 641 311 36
110008229001
110008326064
91164151606,   911.641.516.06,   911 641 516 06
91164151603,   911.641.516.03,   911 641 516 03


Scope of delivery:
1 gear wheel

Suitable for:
911G
Porsche 944 S2
Most other 944-II have the 20x21 or the 20x30 installed. Both can be found in the store.
Although we can say with great certainty
but not with 100% certainty
which model has which gear size installed. Too many influencing factors (engine type/transmission type/transmission/differential type/year/model) play a role here. If, contrary to expectations, you need a different gear