Wheel spacers for PORSCHE with LK 5x130 71.6mm 2x 5mm 10mm/axle

Wheel spacers for PORSCHE with LK 5x130 71.6mm 2x 5mm 10mm/axle

The original from SCC Made in Germany

Description:
This is a set for one axle = 2 track plates with a bolt circle of 5x 130mm and a hub centering of 71.6mm.

There are several reasons for using wheel spacers. With the right track plates, the look of the vehicle can be perfected by defining a flush wheel edge to the edge of the fender. On the other hand, spacer plates also ensure better and safer road holding thanks to a larger track width. Driving some special wheels also requires the use of wheel spacers.

We offer wheel spacers with different connection systems and strengths. In addition to plates with low thicknesses, which are installed with longer wheel bolts or wheel bolts as a push-through system, we also have variants with a double hole circle for adaptation with the original wheel nuts.

These track plates do not have centering on the rim side, so there must be a hub guide of at least disc thickness + 5mm on the wheel hub!

With these spacers with a push-through system, longer wheel bolts may be required!
These must be purchased separately depending on the vehicle and wheel type as a cone or ball collar with correspondingly longer thread and shaft lengths. The minimum screw-in depth for the M14 wheel bolts from the Porsche must be 7.5 turns (approx. 11mm). Please check whether this is the case with your original wheel bolts!

For SCC wheel spacers, TÜV parts reports and vehicle-specific strength reports can be downloaded/applied for directly from the manufacturer. Whether a parts report or a strength report is available depends on the vehicle.

In principle, documents are available so that use with an individual acceptance is always possible.

anodised silver

The origins of the German company SCC Fahrzeugtechnik date back to 1984. Since it began offering and installing sporty car accessories, the family business has grown steadily. As a specialist in the area of wheel spacers and adaptations, SCC has the largest range in the industry and continually develops new solutions.

Suitable for:
911 '74-89' with TÜV parts certificate
964 with TÜV parts certificate
993 with TÜV parts certificate
928 with TÜV parts certificate
968 with TÜV parts certificate
944 with TÜV parts certificate
924 Turbo / GT with TÜV parts certificate
others with LK 5x130 by individual purchase