Wheel spacers for PORSCHE from '94- with LK 5x130 71.6mm 2x 5mm 10mm/axle 2P

Wheel spacers for PORSCHE from '94- with LK 5x130 71.6mm 2x 5mm 10mm/axle 2P

The original from SCC Made in Germany

Description:
This is a set for one axle = 2 track plates with a bolt circle of 5x 130mm and a hub centering of 71.6mm.

There are several reasons for using wheel spacers. With the right track plates, the look of the vehicle can be perfected by defining a flush wheel edge to the edge of the fender. On the other hand, spacer plates also ensure better and safer road holding thanks to a larger track width. Driving some special wheels also requires the use of wheel spacers.

We offer wheel spacers with different connection systems and strengths. In addition to plates with low thicknesses, which are installed with longer wheel bolts or wheel bolts as a push-through system, we also have variants with a double hole circle for adaptation with the original wheel nuts.

These track plates have a 3-pin centering specifically for some Porsche models. The centering pins mesh with the pins in the wheel hub and ensure optimal running behavior of the wheel without possible vibrations.

With these spacers with a push-through system, longer wheel bolts may be required!
These must be purchased separately depending on the vehicle and wheel type as a cone or ball collar with correspondingly longer thread and shaft lengths. The minimum screw-in depth for the M14 wheel bolts from the Porsche must be 7.5 turns (approx. 11mm). Please check whether this is the case with your original wheel bolts!

For SCC wheel spacers, TÜV parts reports and vehicle-specific strength reports can be downloaded/applied for directly from the manufacturer. Whether a parts report or a strength report is available depends on the vehicle.

In principle, documents are available so that use with an individual acceptance is always possible.

anodised silver

The origins of the German company SCC Fahrzeugtechnik date back to 1984. Since it began offering and installing sporty car accessories, the family business has grown steadily. As a specialist in the area of wheel spacers and adaptations, SCC has the largest range in the industry and continually develops new solutions.

Suitable for:
993 with TÜV parts certificate
996 with TÜV parts certificate
997 with TÜV parts certificate
991 with TÜV parts certificate
986/987/981/982 Boxster/Cayman with TÜV parts certificate
Cayenne 9PA / 92A / 9YA with TÜV parts certificate
Panamera 970 / 971 with TÜV parts certificate
Taycan with TÜV parts certificate
others with LK 5x130 by individual purchase