Shock absorber conversion kit for PORSCHE 944 S2 968 threaded sleeves + key SET
Conversion kit to Bilstein B6
Description:
Here you get a complete kit to convert pressed 944S2 front axle shock absorbers to bolted Bilstein B6 shock absorbers. The kit includes 2x shock absorbers, 2x threaded sleeve and 1x cartridge wrench, which is needed to tighten the union nut of the shock absorbers. The installation steps can be found in the following instructions.
How to proceed:
1. chisel open the pressing of the old shock absorber parts and pull out the damper cartridges
2. shorten the tubes by 44.5mm
3. remove the zinc coating from the threaded sleeves in the welding area
4. carefully drive the threaded sleeves into the tubes and weld well all around (Before welding, check that the gap between the tube and threaded sleeve fits. It must be possible to tighten the damper cartridge with the nut with 5 full turns)
5. grind the weld seam smooth, paint and assemble the shock absorber
In our webshop you will find a variety of other spare parts for your Porsche.
This product is a set of branded goods from renowned automotive suppliers created by partworks. If we identify the manufacturer of the components, for example by cardboard packaging, it will also be a set component from this manufacturer. However, please do not forget that even the largest suppliers sometimes trade with each other. In any case, you can always rely on the high quality standards of our components.
Scope of delivery:
According to illustration
Suitable for:
944 S2
968
with pressed Sachs/Boge shock absorbers